AG7 / LR926 Batteries
Filter
Clear filter
AG7 and LR926 batteries provide reliable 1.5V power to microelectronics.
AG7 (LR926) button cells provide a stable 1.5V voltage with a capacity of 45mAh. With dimensions of 9.5 mm in diameter and 2.6 mm in height, this format is ideal for fine mechanical watches and small electronic measuring devices. Thanks to Alkaline technology, these batteries perfectly withstand moderate loads over a longer period of time. Its 0% Mercury composition guarantees full compliance with modern environmental standards and makes everyday use completely safe.
Physical and technical advantages:
- 45mAh resource: For long-term performance in medical devices and wristwatches.
- Constant flow: Does not overload the equipment's electronic circuit during discharge.
- 2.6 mm height: Allows the element to be safely placed in a hermetic housing.
Reliable microbatteries provide a long service life and precise technological operation support for professionals. For devices requiring an even thinner design, we also offer AG6 / LR921 Batteries models for maximum safety. Safety standards require the use of only certified and tested elements in the equipment. Properly selected components that meet technical specifications significantly extend the operating cycle of the hardware in extreme working conditions. Careful selection of materials and engineering during the manufacturing process ensure maximum reliability and safety in all technical application scenarios. This analytical approach is fundamental to today's demanding industrial needs, where there is no room for error and where energy efficiency is always a primary requirement for any reliable system. This allows for significant resource savings in the long run, guaranteeing safety.
Q: What are the physical characteristics and application spectrum of the AG7 / LR926 battery?
Q: Why are AG7 (LR926) batteries often used in keychain mini LED flashlights and car immobilizers?
Q: Why is the voltage stability of AG7 batteries important in digital dictaphones and voice recorder pendants?
Q: Can an AG7 (LR926) be replaced by similar-sized AG6 (LR921) or AG8 (LR1120) batteries?
Q: How to properly dispose of used AG7 coin cell batteries and why are they dangerous to children?
A: The standard dimensions of an AG7 battery are 9.5 mm in diameter and 2.6 mm in thickness, delivering approximately 35 mAh capacity at 1.5V voltage. This medium diameter and thin profile element is optimized for pocket-sized electronic accessories.
Q: Why are AG7 (LR926) batteries often used in keychain mini LED flashlights and car immobilizers?
A: Keychain LED flashlights and security chips require compact power that does not increase the weight of the key set. VIDEX LR926 batteries can provide the necessary impulse for lighting the LED diode and transmitting the RF signal to the immobilizer antenna.
Q: Why is the voltage stability of AG7 batteries important in digital dictaphones and voice recorder pendants?
A: Micro-dictaphone pre-amplifiers and flash memory microchips are sensitive to power fluctuations. Alkaline AG7 elements maintain a steady current output during recording, preventing audio file distortions or unexpected recording interruptions.
Q: Can an AG7 (LR926) be replaced by similar-sized AG6 (LR921) or AG8 (LR1120) batteries?
A: No, the AG6 is 0.5 mm thinner (2.1 mm) and will not create contact pressure, while the AG8 has a larger diameter (11.6 mm) and will physically not fit into the plastic socket designed for the AG7.
Q: How to properly dispose of used AG7 coin cell batteries and why are they dangerous to children?
A: Due to their small size, coin cell batteries pose a serious swallowing risk to children and pets. A swallowed battery in the esophagus can cause severe chemical burns within a few hours, therefore used AG7 elements must immediately be placed in safe packaging and handed over to special sorting points.
