AG11 / LR721 Batteries
Filter
Clear filter
AG11 and LR721 batteries provide reliable 1.5V power to microelectronics.
The compact AG11 (LR721) microbatteries provide a capacity of 20mAh, fitting into a diameter of only 7.9 mm. They are fundamentally important in precision mechanical components where physical space is strictly limited. Their applications cover microscopic LED illuminators and specific logic control modules. Due to the high density of the metal casing, any impact on sensitive microchips is completely isolated.
Physical and technical advantages:
- 7.9 mm diameter: Ultra-compact format for precision mechanical assembly.
- Safe chemistry: Minimal discharge at high temperatures.
- Stable current: Integrates perfectly into complex microsensors.
Despite their small size, they guarantee industrial-level efficiency, improving the durability of any instrument. For slightly larger instruments with a diameter of 11.6 mm, we recommend strong solutions such as AG10 / LR1130 Batteries. Safety standards require the use of only certified and tested elements in the equipment. Properly selected components that meet technical specifications significantly extend the operating cycle of the hardware in extreme working conditions. Careful selection of materials and engineering during the manufacturing process ensure maximum reliability and safety in all technical application scenarios. This analytical approach is fundamental to today's demanding industrial needs, where there is no room for error and where energy efficiency is always a primary requirement for any reliable system. This allows for significant resource savings in the long run.
Q: What is the specification of the AG11 / LR721 battery and its primary microelectronics niche?
Q: Why is the AG11 an irreplaceable element in delicate thermometers and temperature silk sensors?
Q: What are the riskiest mistakes when trying to replace the thin AG11 battery in a device?
Q: How does the alkaline AG11 (LR721) behave compared to similar-sized silver oxide (SR721) versions?
Q: Is the AG11 / LR721 safe to operate in high humidity conditions?
A: The AG11 stands out with a highly compact IEC geometry – 7.9 mm in diameter and only 2.1 mm thick, encompassing about 20 mAh capacity. This miniature 1.5V format is critically needed in thin thermal sensors, hearing aids, and special micro-LED indicators, where space is restricted to tenths of a millimeter.
Q: Why is the AG11 an irreplaceable element in delicate thermometers and temperature silk sensors?
A: The thin architecture (2.1 mm) allows engineers to develop ultra-flat and lightweight thermometer housings that do not bother the user. The VIDEX LR721 (AG11) alkaline element guarantees stable and continuous power to the LCD screen when the thermometer is turned on, ensuring correct C°/F° calibration without blurred digits.
Q: What are the riskiest mistakes when trying to replace the thin AG11 battery in a device?
A: Incorrect polarity and mechanical contact damage are the most common problems in microelectronics. When inserting this 2.1 mm thin battery (with fingers or metal tweezers) it is very easy to bridge the short contact zone of the (+) and (-) poles. AG11 elements must always be inserted using plastic tools, or at least handled only by the edges.
Q: How does the alkaline AG11 (LR721) behave compared to similar-sized silver oxide (SR721) versions?
A: The SR721 silver oxide battery offers 30-40% more capacity and an absolutely flat discharge curve for high-end watches. However, in soft children's toys and simple electronic indicators, where power duration is not measured in years, AG11 (LR721) alkaline technology provides financially accessible power with an identical 1.5V voltage.
Q: Is the AG11 / LR721 safe to operate in high humidity conditions?
A: Alkaline batteries have a metal casing with an internal seal, but the element itself is not IP (Ingress Protection) certified for water resistance. High humidity or direct sweat on battery contacts causes galvanic corrosion, therefore airtightness – for example, in pool thermometers – must be provided by the device's own O-ring seal.
