AG10 / LR1130 Batteries
Filter
Clear filter
AG10 and LR1130 batteries provide reliable 1.5V power to microelectronics.
AG10 or LR1130 cells are one of the most popular 1.5V elements with an average capacity of 78mAh. They are used mainly in pocket electronic devices, watches, toys, and laser pens. The stable reaction of the alkaline material during standby protects the element from discharging. Therefore, the equipment is in working order even if it has not been used for a long time. All elements meet the 0% mercury requirements, guaranteeing their implementation in modern green e-commerce.
Physical and technical advantages:
- 78mAh power: Maintains smooth operation of lasers and small motors.
- Rigid casing: Protects AGainst physical impacts.
- Ecological safety: The composition meets all heavy metal restrictions.
The innovative design and power provide maximum confidence in the functionality of any portable system. In addition to the 9.5 mm size spectrum, you can also find optimized AG9 / LR936 Batteries with stable output. Safety standards require the use of only certified and tested elements in the equipment. Properly selected components that meet technical specifications significantly extend the operating cycle of the hardware in extreme working conditions. Careful selection of materials and engineering during the manufacturing process ensure maximum reliability and safety in all technical application scenarios. This analytical approach is fundamental to today's demanding industrial needs, where there is no room for error and where energy efficiency is always a primary requirement for any reliable system. This allows for significant resource savings in the long run.
Q: What are the IEC standard dimensions and typical capacity of an AG10 / LR1130 battery?
Q: Why are LR1130 batteries preferred in scientific calculators and electronic books?
Q: Why is the AG10 format used in car key fobs and immobilizers with a separate coin cell socket?
Q: How does alkaline AG10 (LR1130) differ from the silver oxide SG10 (SR1130) version?
Q: What is the correct action if an AG10 battery has not been used for a long time and is covered with a layer of white powder?
A: The physical dimensions of the AG10 battery are 11.6 mm in diameter and 3.1 mm in thickness at a nominal voltage of 1.5V. This popular alkaline element provides approximately 70 mAh capacity, which is optimal for medium-load portable microelectronics.
Q: Why are LR1130 batteries preferred in scientific calculators and electronic books?
A: The LCD displays and processors of these devices require continuous but microampere-level current supply for many months. VIDEX LR1130 batteries provide low self-discharge (under 2% per year), eliminating the need to frequently change power elements and guaranteeing stable display contrast.
Q: Why is the AG10 format used in car key fobs and immobilizers with a separate coin cell socket?
A: The remote control's radio transmitter creates a brief current peak of up to tens of milliamperes at the moment the button is pressed. AG10 alkaline electrochemistry can maintain the necessary voltage without a sharp drop, ensuring stable radio signal transmission to the car's receiver.
Q: How does alkaline AG10 (LR1130) differ from the silver oxide SG10 (SR1130) version?
A: SR1130 (Silver Oxide) provides a constant 1.55V voltage until the very end of discharge and is intended for high-precision wristwatches. Meanwhile, alkaline LR1130 experiences a gradual voltage decrease during discharge, which is precisely suited for calculators and electronic toys.
Q: What is the correct action if an AG10 battery has not been used for a long time and is covered with a layer of white powder?
A: The white deposits are reaction products of zinc and potassium hydroxide, indicating an electrolyte leak and loss of housing hermeticity. Such a battery must not be left in the device; it should be immediately removed and disposed of in a battery sorting container, and the device's contacts must be cleaned of corrosion.
