Emergency LED Luminaire with sensor 15-30W 2700-6500K IP44, VIDEX VL-CLR-EM300-2 – Safe evacuation and automatic motion detection
Emergency LED Luminaire with sensor 15-30W 2700-6500K IP44, VIDEX VL-CLR-EM300-2 – Safe evacuation and automatic motion detection
Product:
Price:
€ 31.92
€ 39.90
Delivery time at the pickup address:
To our warehouse:
In our stock
Shipping company:
0
working days
Total days:
0
working days
Today 05.07.2026
Shipping cost:
€ 0.00
Shipping time to parcel box:
To our warehouse:
In our stock
Shipping company:
2
working days
Total days:
2
working days
Tuesday 07.07.2026
Shipping cost:
From € 2.50
Shipping time by courier:
To our warehouse:
In our stock
Shipping company:
3
working days
Total days:
3
working days
Wednesday 08.07.2026
Shipping cost:
From € 4.90
In order for above mentioned delivery dates by parcel locker and courier to be met, order has to been placed in time and seller has managed to send it out by the end of working day.
-
Power (W):15-30
-
Luminous flux (lm):1800/2500/3000
-
Color temperature (K):2700/3000/4000/5000/6500
-
Beam angle (°):120
-
Usage:Ārkārtas gadījumos - Iekštelpas, Ārtelpas
-
Color:Balta
-
Ingress protection:IP44
-
Impact protection:IK07
-
Motion sensor:Yes
-
Warranty:3
-
Measurements (LxWxH) (mm):323x323x55
-
Material:ABS+PMMA+PC
-
Weight (kg):0.84
-
Package (pcs.):10
-
Rated voltage (V), frequency (Hz):AC 175-265V, 50/60Hz + Li-ion 18650 x 2 2200mAh
-
Color rendering index (CRI):Ra > 80
-
Lifetime (h):25 000h
-
On/Off cycles:20 000
-
Diffuser material:PMMA
-
Operating temperature range (°C):-20° +40°C
-
Dimmable:Yes, manual switch
The emergency backup light will turn on automatically when the power goes out and the light switch remains on. When the power returns, the lamp will automatically switch from the emergency light state to regular power lighting.
Note! In emergency situations, when the emergency backup indicator turns on, the motion sensor is disabled.
BATTERY CHARGING
When the lamp is used daily, the batteries will be charged automatically, in situation when lamp is used irregular, the batteries are charged every time the light switch is turned on. When the light switch is off, the batteries are not charged. The lamp has a built-in intelligent internal circuit with overcharge, overload and overvoltage protection.
KIT CONTENTS
Lamp with two rechargeable batteries VIDEX Li-ION 18650 2200 mAh
Surface mount kit
User manual
Individual packaging
ASSEMBLY RECOMMENDATIONS
The minimum distance between two ceiling lamps must be at least 3 meters to avoid mutual interference of the sensor.
INSTRUCTIONS FOR USER
Switch #1. Modes setting:
Position 1 - normal mode. The lamp operates in on/off mode;
Position 2 - day sensor mode. The lamp automatically turns on when the sensor detects movement during the day or at night (>30 lux) and turns off after a certain time when no movement is detected.
Position 3 - night sensor mode. The lamp automatically turns on when the sensor detects movement at night (< 30 lux) and turns off after a certain time when no movement is detected.
Switch #2. Setting the sensor induction delay:
1st position - 30 seconds;
2nd position - 60 seconds;
Position 3 - 180 seconds.
Switch #3. Light color temperature setting:
Position 1 - 2700K (warm white);
Position 2 - 3000K (warm white);
Position 3 - 4000K (neutral white);
Position 4 - 5000K (neutral white);
Position 5 - 6500K (cold white).
Switch #4. Light power setting:
1st position - 30W;
2nd position - 25W;
3rd position - 15W.
BATTERY REPLACEMENT
The product is equipped with replaceable batteries. If you notice that the battery has worn down over time, it can be replaced. Used batteries can only be replaced with batteries of the same type. Follow the steps below to replace the batteries.
a) Remove the lamp;
b) Unscrew the screws holding the transparent protective cover and remove the cover;
c) Insert new batteries according to the diagram (+/-) shown near the battery compartment;
d) Put back the transparent cover and fasten it with the appropriate screws;
e) Reinstall the lamp.
FUNCTIONAL CHARACTERISTICS
This product is intended for indoor use, but it can also be installed in wet rooms due to its IP44 moisture protection rating, such as basements, entrances, corridors, warehouses and other similar rooms where wet environments are possible.
Delivery and Shipping
We know that time is money. That is why our core products, including the full range of VIDEX LED lighting, are in stock in our warehouse. This allows us to ensure fast and accurate order processing for both private individuals and B2B clients across the Baltics.
Delivery methods:
Parcel machines (Omniva, Venipak, LP Express / Unisend): A convenient and fast way to receive small and medium-sized goods at your preferred time.
Courier delivery: Delivery right to the door of your home, office, or project site. Ideal for larger orders, tools, and heavier goods.
B2B and pallet delivery: For large-volume orders and wholesale contract clients, we provide pallet delivery directly to your site, production facility, or warehouse.
Orders are processed and handed over for delivery immediately after receipt of payment (or in accordance with the B2B postpaid contract). Exact delivery costs are calculated automatically at checkout based on the size and weight of the items.
Payment Methods and Procedures
At opentools.lv, we provide secure and fast payment for your purchases. Payment processing is handled by our partner MakeCommerce (Maksekeskus AS), guaranteeing the highest data security standards.
Available payment methods:
Online banking and payment cards: Fast and secure payments with VISA, Mastercard, and major online banks (Swedbank, SEB, Citadele, Luminor, etc.).
Bank transfer and B2B deferred payment: For businesses and regular partners (contract clients), we provide a specialized B2B system. It allows you to place orders conveniently and receive postpaid invoices or deferred payments. Contact us to sign a partnership agreement and gain access to the B2B platform!
All payments are made in euros (EUR). Order processing and preparation for delivery begin immediately upon successful payment or in accordance with the terms of the B2B contract.
Available payment methods:
Online banking and payment cards: Fast and secure payments with VISA, Mastercard, and major online banks (Swedbank, SEB, Citadele, Luminor, etc.).
Bank transfer and B2B deferred payment: For businesses and regular partners (contract clients), we provide a specialized B2B system. It allows you to place orders conveniently and receive postpaid invoices or deferred payments. Contact us to sign a partnership agreement and gain access to the B2B platform!
All payments are made in euros (EUR). Order processing and preparation for delivery begin immediately upon successful payment or in accordance with the terms of the B2B contract.
