Emergency LED Luminaire Power Supply 3-50W, Li-Ion 2x18650, 3.7V, 2200mAh, VIDEX VL-EMM-L23 – Ensures luminaire operation during power failure
Emergency LED Luminaire Power Supply 3-50W, Li-Ion 2x18650, 3.7V, 2200mAh, VIDEX VL-EMM-L23 – Ensures luminaire operation during power failure
Product:
Price:
€ 12.68
€ 16.90
Delivery time at the pickup address:
To our warehouse:
In our stock
Shipping company:
0
working days
Total days:
0
working days
Today 05.07.2026
Shipping cost:
€ 0.00
Shipping time to parcel box:
To our warehouse:
In our stock
Shipping company:
2
working days
Total days:
2
working days
Tuesday 07.07.2026
Shipping cost:
From € 2.50
Shipping time by courier:
To our warehouse:
In our stock
Shipping company:
3
working days
Total days:
3
working days
Wednesday 08.07.2026
Shipping cost:
From € 4.90
In order for above mentioned delivery dates by parcel locker and courier to be met, order has to been placed in time and seller has managed to send it out by the end of working day.
-
Power (W):3-50W
-
Usage:Iekštelpas
-
Color:Balta
-
Ingress protection:IP20
-
Warranty:2
-
Measurements (LxWxH) (mm):164x45x22
-
Material:Polycarbonate (PC)
-
Weight (kg):0.165
-
Package (pcs.):100
-
Rated voltage (V), frequency (Hz):AC 220-240V // Li-Ion 2 x 18650 2200mAh
-
Lifetime (h):Avārijas režīmā (kad pazūd tīkla spriegums) tas nodrošina nepārtrauktu apgaismojuma barošanu ar jaudu 3W līdz 3,5h.
-
Operating temperature range (°C):0°C ~ + 45°С
The emergency power supply unit for LED luminaires VIDEX VL-EMM-L23 is designed to provide backup power to luminaires during a power outage. It operates with two embedded lithium-ion batteries with a capacity of 2200mAh each. It is used for lamps and luminaires with their own driver without galvanic isolation. In emergency mode (when the mains voltage disappears), it provides continuous power for lighting with a power of up to 3W for up to 3.5 hours.
Has 3 operating modes. The kit includes a test cable that is used to check proper operation in emergency mode. The unit has built-in batteries that can be replaced if necessary. Replacement of batteries should only be performed by a qualified specialist.
FEATURES:
- Input power: from 3 to 50W (nominal power of the lamp)
- Input voltage: AC 220 - 240V, 50/60Hz
- Battery type: Li-ion 18650 3.7V
- Battery capacity: 2200mAh x2
- Emergency operation time: approximately 3.5 hours
- Output power: 3W (Max)
- Output voltage: DC 230V (Max)
- Efficiency: 90%
- Not compatible with light dimmers
- Moisture protection class: IP20
- Operating temperature: from 0°C to +45°C
INSTALLATION AND CONNECTION
Before installation, be sure to read the user manual. Installation must be performed by a qualified specialist. All work should be carried out with the power disconnected. Select the desired module operation scenario and install and connect it according to the diagrams in the instructions:
I. Always off - the light remains off as long as there is power from the mains. In the event of a power outage, it switches to emergency mode and will remain on until the battery is completely discharged.
II. Always on - the light remains on as long as there is power from the mains. In the event of a power outage, it switches to emergency mode until the battery is completely discharged.
III. Switch control - the light can be turned on or off using a standard wall switch during normal operation. Regardless of the switch position, the emergency function is automatically activated in the event of a power outage.
Before first use, it is necessary to check the correctness of the mechanical fastening and connection. The product may only be used in a network that meets the energy requirements and quality standards established by law.
ATTENTION! The polarity of the power source must strictly comply with the electrical connection diagram. Incorrect polarity may cause damage to the device or loss of functionality.
INDICATOR OPERATION DESCRIPTION
The module housing has an indicator that remains on during normal operation and turns off when emergency mode is activated:
1) Indicator is solid green: battery is fully charged.
2) Indicator is solid red: battery is charging.
3) Indicator flashes red: fault detected.
4) Indicator is off: emergency mode is activated.
CHECKING EMERGENCY MODE FUNCTION
This module includes a test cable designed to verify proper operation in emergency mode. There are two ways to check if the emergency functions are working correctly:
- Method 1. Triple-press test (manual switching mode):
Press the test button three times. The green indicator will flash and the module will enter emergency mode. Press and hold the test button for 2 seconds to exit emergency mode.
- Method 2: Short-term test (automatic return mode):
Press and hold the test button to activate emergency mode. Release the test button to exit emergency mode.
PRECAUTIONS:
1. Battery replacement should be performed by a qualified technician according to the instructions. Before replacement, disconnect the mains power and the emergency module from both the LED light and the mains power.
2. If the product is to be stored for a long time, fully charge the battery. Do not store the product with a discharged battery, as this will cause irreversible damage.
3. Do not use the product with damaged wiring or connection points.
4. Clean the product only with soft and dry cloths. Do not use chemical or abrasive cleaning agents.
5. Do not cover the product, ensure free air access.
Has 3 operating modes. The kit includes a test cable that is used to check proper operation in emergency mode. The unit has built-in batteries that can be replaced if necessary. Replacement of batteries should only be performed by a qualified specialist.
FEATURES:
- Input power: from 3 to 50W (nominal power of the lamp)
- Input voltage: AC 220 - 240V, 50/60Hz
- Battery type: Li-ion 18650 3.7V
- Battery capacity: 2200mAh x2
- Emergency operation time: approximately 3.5 hours
- Output power: 3W (Max)
- Output voltage: DC 230V (Max)
- Efficiency: 90%
- Not compatible with light dimmers
- Moisture protection class: IP20
- Operating temperature: from 0°C to +45°C
INSTALLATION AND CONNECTION
Before installation, be sure to read the user manual. Installation must be performed by a qualified specialist. All work should be carried out with the power disconnected. Select the desired module operation scenario and install and connect it according to the diagrams in the instructions:
I. Always off - the light remains off as long as there is power from the mains. In the event of a power outage, it switches to emergency mode and will remain on until the battery is completely discharged.
II. Always on - the light remains on as long as there is power from the mains. In the event of a power outage, it switches to emergency mode until the battery is completely discharged.
III. Switch control - the light can be turned on or off using a standard wall switch during normal operation. Regardless of the switch position, the emergency function is automatically activated in the event of a power outage.
Before first use, it is necessary to check the correctness of the mechanical fastening and connection. The product may only be used in a network that meets the energy requirements and quality standards established by law.
ATTENTION! The polarity of the power source must strictly comply with the electrical connection diagram. Incorrect polarity may cause damage to the device or loss of functionality.
INDICATOR OPERATION DESCRIPTION
The module housing has an indicator that remains on during normal operation and turns off when emergency mode is activated:
1) Indicator is solid green: battery is fully charged.
2) Indicator is solid red: battery is charging.
3) Indicator flashes red: fault detected.
4) Indicator is off: emergency mode is activated.
CHECKING EMERGENCY MODE FUNCTION
This module includes a test cable designed to verify proper operation in emergency mode. There are two ways to check if the emergency functions are working correctly:
- Method 1. Triple-press test (manual switching mode):
Press the test button three times. The green indicator will flash and the module will enter emergency mode. Press and hold the test button for 2 seconds to exit emergency mode.
- Method 2: Short-term test (automatic return mode):
Press and hold the test button to activate emergency mode. Release the test button to exit emergency mode.
PRECAUTIONS:
1. Battery replacement should be performed by a qualified technician according to the instructions. Before replacement, disconnect the mains power and the emergency module from both the LED light and the mains power.
2. If the product is to be stored for a long time, fully charge the battery. Do not store the product with a discharged battery, as this will cause irreversible damage.
3. Do not use the product with damaged wiring or connection points.
4. Clean the product only with soft and dry cloths. Do not use chemical or abrasive cleaning agents.
5. Do not cover the product, ensure free air access.
6. The product cannot be used in adverse conditions, such as dust, water, humidity, vibration, explosive atmosphere, fumes or chemical vapors, etc.
Delivery and Shipping
We know that time is money. That is why our core products, including the full range of VIDEX LED lighting, are in stock in our warehouse. This allows us to ensure fast and accurate order processing for both private individuals and B2B clients across the Baltics.
Delivery methods:
Parcel machines (Omniva, Venipak, LP Express / Unisend): A convenient and fast way to receive small and medium-sized goods at your preferred time.
Courier delivery: Delivery right to the door of your home, office, or project site. Ideal for larger orders, tools, and heavier goods.
B2B and pallet delivery: For large-volume orders and wholesale contract clients, we provide pallet delivery directly to your site, production facility, or warehouse.
Orders are processed and handed over for delivery immediately after receipt of payment (or in accordance with the B2B postpaid contract). Exact delivery costs are calculated automatically at checkout based on the size and weight of the items.
Payment Methods and Procedures
At opentools.lv, we provide secure and fast payment for your purchases. Payment processing is handled by our partner MakeCommerce (Maksekeskus AS), guaranteeing the highest data security standards.
Available payment methods:
Online banking and payment cards: Fast and secure payments with VISA, Mastercard, and major online banks (Swedbank, SEB, Citadele, Luminor, etc.).
Bank transfer and B2B deferred payment: For businesses and regular partners (contract clients), we provide a specialized B2B system. It allows you to place orders conveniently and receive postpaid invoices or deferred payments. Contact us to sign a partnership agreement and gain access to the B2B platform!
All payments are made in euros (EUR). Order processing and preparation for delivery begin immediately upon successful payment or in accordance with the terms of the B2B contract.
Available payment methods:
Online banking and payment cards: Fast and secure payments with VISA, Mastercard, and major online banks (Swedbank, SEB, Citadele, Luminor, etc.).
Bank transfer and B2B deferred payment: For businesses and regular partners (contract clients), we provide a specialized B2B system. It allows you to place orders conveniently and receive postpaid invoices or deferred payments. Contact us to sign a partnership agreement and gain access to the B2B platform!
All payments are made in euros (EUR). Order processing and preparation for delivery begin immediately upon successful payment or in accordance with the terms of the B2B contract.
