Losing connection to an important device just because of a dead battery is frustrating. The VIDEX CR1225 lithium battery is designed to keep medical thermometers and devices alive for years.
Replace it and forget about it. Power for your tech's stability is just a reach away. Order at opentools.lv today!
A: The CR1225 has a diameter of 12.5 mm and a thickness of 2.5 mm; its 3.0V lithium system provides about 50 mAh capacity. This compact but relatively thick format guarantees higher energy density for devices with very small diameter sockets, such as small-format blood pressure monitors or special LED indicators.
A: Maintaining light diode brightness requires a strong impulse (around 3.0V), while motion sensors demand a long standby mode. The VIDEX CR1225 lithium element offers a slow discharge curve at low temperatures, maintaining bright LED output in autumn and winter outdoor conditions.
A: If the thermometer has a backlight, two 1.5V coin cell batteries take up too much space in thickness. A single 3.0V lithium CR1225 battery can simultaneously power both the sensor's ADC converter and the LCD screen's LED diode, providing sufficient (50 mAh) capacity for multiple years of measurement cycles.
A: Both have an identical 12.5 mm diameter, but the thickness difference is microscopic (2.0 mm versus 2.5 mm). If a CR1220 is inserted into a 2.5 mm socket, the contact will be loose and the device will reset, but if you try to press a 2.5 mm thick CR1225 into a 2.0 mm socket, it will physically deform the casing's plastic seal.
A: Plastic or ceramic tweezers MUST be used, because the 12.5 mm battery area is so small that a metal tool touching both the flat cap (+) and the side edge (-) will instantly cause a short circuit, ruining the element even before it is inserted into the sensor.