Ceiling Lights and LED Flush Mounts
Filter
Clear filter
Ceiling Lights and LED Flush Mounts provide reliable surface mounting on concrete and solid ceilings, guaranteeing wide-angle light distribution in living spaces.
Modern spatial architecture and lighting require functional compliance and excellent performance. By optimizing energy consumption and aesthetics, these luminaires provide stable and continuous operation in various operating conditions. Low-quality lighting can cause eye strain due to unpredictable flickering and weak components, making it critical to choose a reliable and proven solution. VIDEX manufacturing technologies integrate durable materials and high-efficiency LEDs to ensure uninterrupted and safe illumination in both utility rooms and everyday living spaces, adhering to strict engineering standards.
Optimized performance and light quality:
- High energy efficiency: Models up to 48W/72W with optimized lumen (lm) output significantly reduce power consumption and heat dissipation in the room.
- Stable operation: The integrated IC current driver prevents voltage fluctuations, guaranteeing "No Flicker" light that protects visual comfort.
- Long-lasting resource: Built-in LED cells provide up to 30,000 hours of service life and withstand temperatures from -20°C to +40°C.
- Wide-angle light output: The precisely calibrated 120° scattering angle guarantees uniform illumination without dark areas, excellent for spacious living areas.
Effective selection of light fixtures ensures predictable power output and lower maintenance costs in the long run. When planning a new room layout and fixing equipment positions, our Switches and Sockets will be highly useful for convenient lighting control wiring.
Q: What is the engineering rationale for replacing traditional ceiling chandeliers with integrated LED plafonds?
Q: How does the opal or PMMA diffuser built into plafonds alter the nature of luminous flux in a room?
Q: How does the aluminum base of VIDEX LED plafonds ensure the stability of the crystal's operating temperature?
Q: What voltage (lumen) reserve needs to be planned when installing plafonds in rooms with dark finishes?
Q: What electrical wiring (cross-section) is appropriate for connecting standard apartment ceiling plafonds?
A: Integrated plafonds combine the power driver, aluminum radiator, and SMD diode matrix in a single flat housing without bulb sockets. This architecture prevents optical losses through dense glass lampshades and ensures direct light output (up to 100 lm/W), reducing consumption by 60% at identical brightness.
Q: How does the opal or PMMA diffuser built into plafonds alter the nature of luminous flux in a room?
A: The diffuser acts as an optical lens that physically refracts and scatters the sharp point light from SMD diodes into a 120 to 160-degree wide angle. This mechanically smooths the light gradient on ceilings and walls, preventing harsh shadows and reducing the Unified Glare Rating (UGR) in work and rest areas.
Q: How does the aluminum base of VIDEX LED plafonds ensure the stability of the crystal's operating temperature?
A: The aluminum base pressed into plafond housings acts as a primary cooling radiator, accelerating convection between the diodes and room air. Effective thermal dissipation strictly keeps the diode temperature below +65°C (L70 standard), preventing phosphor degradation over a 30,000-hour cycle.
Q: What voltage (lumen) reserve needs to be planned when installing plafonds in rooms with dark finishes?
A: Engineering standards state that dark matte walls and furniture physically absorb 30% to 50% of the emitted photons, without reflecting them back into the room. Therefore, when designing lighting for gray or dark interiors, the luminaire's total lumen output must be doubled to achieve 300 to 500 lx illuminance on the floor, complying with the LVS EN 12464-1 standard.
Q: What electrical wiring (cross-section) is appropriate for connecting standard apartment ceiling plafonds?
A: Most 15W–40W plafonds consume minimal current at peak power (inrush current), so an NYM-J 3x1.5 mm² copper cable is entirely sufficient. Such a cross-section will strictly withstand a load of up to 16A across the entire line, allowing more than twenty 24W plafonds to be connected in series on a single switch without the risk of overheating.
