Magnetic LED Modules for Ceiling Lights

Do filter

LED Modules for Ceiling Lights (Flush Mounts)

Do you still have an old glass ceiling dome at home with traditional E27 bulb sockets or outdated, buzzing fluorescent circular lamps (T9)? Don't throw away your beautiful glass dome! Instead of buying a completely new luminaire, the smartest solution is LED modules for ceiling lights. These magnetic "retrofit" discs are a small engineering miracle. You literally "cure" your old lamp. Cheap market LED rings quickly overheat and lack driver protection. VIDEX magnetic LED modules offer industrial stability for a few euros, extending the life of your favorite lamp by decades.

Why switch to magnetic LED modules (World-class sustainability and TCO):

Magnetic "Click" mounting: The back of the module has strong magnets. Simply remove the old bulb sockets in the metal base and "stick" this LED disc directly to the metal. Installation takes 3 minutes!
Massive energy savings: A module that consumes only 20W shines brighter than two old 75W incandescent bulbs combined, evenly illuminating the entire glass dome without dark spots.
Saving nature and wallet: Instead of generating waste and buying a new flush mount, you modernize the existing one. The built-in IC driver guarantees flicker-free light and protection against burnout.

In summary, LED magnetic modules are the smartest, cheapest, and most environmentally friendly way to bring modern lighting to your old lamps. Join the sustainable movement and upgrade your home light today!

Q: What are the engineering advantages of Retrofit LED modules in reconstructing old luminaires?

A: Retrofit LED modules allow replacing fluorescent lamps or incandescent sockets while preserving the existing plafond housing and glass diffuser. The module with an integrated IC driver and magnetic mounts ensures direct connection to the 230V grid, increasing the luminaire's energy efficiency up to 110 lm/W and preventing full fixture dismantling.

Q: How to ensure a safe and thermally correct fixation of a Retrofit LED module to the luminaire base?

A: Retrofit modules are equipped with built-in neodymium magnets and additional screw connection points. The magnets firmly press the module's aluminum base directly against the plafond's metal housing, creating direct thermal contact for heat dissipation and preventing the module from sliding under vibration.

Q: How does the lens optics of VIDEX circular Retrofit LED modules ensure uniform diffuser illumination?

A: In Retrofit modules, each SMD diode is covered with an individual wide-angle (180°) acrylic diffusing lens. This optical matrix refracts the photon beam parallel to the diffuser plane, completely eliminating dark spots and pinpoint diode shadows on the plafond glass.

Q: Why is an aluminum printed circuit board (MCPCB) used as the base in Retrofit LED module production instead of fiberglass (FR4)?

A: The thermal conductivity of an aluminum base (MCPCB) is up to 10 times higher than that of standard FR4 fiberglass boards. It dissipates the heat generated by the SMD diodes over the entire base area and transfers it to the plafond housing, preventing semiconductor overheating and guaranteeing a stably high lumen output.

Q: Why is the transparent insulation coating important for Retrofit modules with an integrated IC driver?

A: The transparent polycarbonate or silicone protective layer completely isolates open 230V current traces and SMD contacts from direct touch. This ensures compliance with electrical wiring safety requirements, protecting the user from electric shock during plafond cleaning and maintenance.