SONOFF Dongle Plus MG24 is a versatile USB gateway that allows you to integrate ZigBee and Thread devices with popular open-source platforms. With it, you can easily expand your smart home system based on Home Assistant, Zigbee2MQTT, openHAB or ioBroker, gaining full control over home automation and compatibility with multiple ecosystems.
The device is based on the powerful EFR32MG24 chip, which offers 1536 KB of Flash memory and 256 KB of RAM. In practice, this means faster command processing, stable communication and the ability to support more connected ZigBee devices.
The Dongle Plus MG24 is equipped with a detachable antenna with a maximum gain of 4.5 dBi, which significantly increases the communication range. In an open space, the signal can reach up to 200 meters, making it easy to build an extensive ZigBee network throughout the home or office. In addition, the kit comes with a 1-meter USB extension cable to better position the gateway and reduce interference.
The SONOFF Dongle Plus MG24 supports several modes of operation - it can operate as a ZigBee coordinator, ZigBee router, Thread RCP or in MultiPAN mode, allowing simultaneous use of ZigBee and Thread. Uploading firmware is extremely easy thanks to the dedicated SONOFF Dongle Flasher tool, which allows online updates in about a minute.
The product's casing is made of aluminum, which ensures durability and resistance to damage. The device has been tested under rigorous conditions - including temperature and corrosion resistance tests or more than 500 USB plug and unplug cycles. This guarantees reliability for everyday use.
| Manufacturer | Sonoff |
|---|---|
| Model | Dongle Plus MG24 |
| Input voltage | 5V / 500 mA |
| Zigbee | IEEE 802.15.4 |
| Operating temperature | -10°C ~ 60°C |
| Material | aluminum, PC, ABS |
| Color | gray |
| Dimensions | 151.5 x 62.5 mm |
Mēs zinām, ka laiks ir nauda. Tāpēc mūsu pamatpreces, tostarp pilns VIDEX LED gaismekļu sortiments, atrodas uz vietas mūsu noliktavā. Tas ļauj mums nodrošināt ātru un precīzu pasūtījumu apstrādi gan privātpersonām, gan B2B klientiem visā Baltijā.
Piegādes veidi:
Pakomāti (Omniva, Venipak, LP Express / Unisend): Ērts un ātrs veids nelielu un vidēju preču saņemšanai sev vēlamā laikā.
Kurjerpiegāde: Piegāde līdz jūsu mājokļa, biroja vai objekta durvīm. Ideāli piemērots lielākiem pasūtījumiem, instrumentiem un smagākām precēm.
B2B un palešu piegāde: Liela apjoma pasūtījumiem un vairumtirdzniecības līgumklientiem nodrošinām palešu piegādi tieši uz jūsu objektu, ražotni vai noliktavu.
Pasūtījumi tiek apstrādāti un nodoti piegādei uzreiz pēc apmaksas saņemšanas (vai saskaņā ar B2B pēcapmaksas līgumu). Precīzas piegādes izmaksas tiek aprēķinātas automātiski pirkuma noformēšanas brīdī, balstoties uz preces izmēru un svaru.
Vietnē opentools.lv mēs nodrošinām drošu un ātru pirkumu apmaksu. Maksājumu apstrādi nodrošina mūsu partneris MakeCommerce (Maksekeskus AS), garantējot augstākos datu drošības standartus.
Pieejamie apmaksas veidi:
Internetbanka un maksājumu kartes: Ātri un droši norēķini ar VISA, Mastercard un populārākajām internetbankām (Swedbank, SEB, Citadele, Luminor u.c.).
Apmaksa ar pārskaitījumu un B2B atliktais maksājums: Uzņēmumiem un pastāvīgajiem sadarbības partneriem (līgumklientiem) nodrošinām specializētu B2B sistēmu. Tā sniedz iespēju ērti veikt pasūtījumus un saņemt pēcapmaksas rēķinus jeb atlikto maksājumu. Sazinieties ar mums, lai noslēgtu sadarbības līgumu un iegūtu piekļuvi B2B platformai!
Visi norēķini tiek veikti eiro (EUR). Pasūtījuma apstrāde un preču sagatavošana piegādei tiek sākta uzreiz pēc veiksmīga norēķina vai atbilstoši B2B līguma nosacījumiem.