Cycplus DC1 Stationary Mini Rehabilitation Bike

Cycplus DC1 Stationary Mini Rehabilitation Bike

Prece:
SKU kods:
DC1
Svītru kods:
6976297860884
Zīmols:
CYCPLUS
Ir noliktavā:
Pēc pasūtījuma
Piegādātāja noliktavā:
> 10 gab.
Cena:
€ 205.14
Piegādes laiks izsniegšanas punktā:
Šobrīd šī opcija nav pieejama.
Piegādes laiks uz pakomātu:
Līdz mūsu noliktavai:
5
darba dienas
Piegādes kompānija:
2
darba dienas
Kopējais laiks:
7
darba dienas
Trešdien 05.08.2026
Piegādes maksa:
No € 2.50
Piegādes laiks ar kurjeru:
Līdz mūsu noliktavai:
5
darba dienas
Piegādes kompānija:
3
darba dienas
Kopējais laiks:
8
darba dienas
Ceturtdien 06.08.2026
Piegādes maksa:
No € 4.90
Preces saņemšanas laiks ir norādīts, ja pirkums un apmaksa ir veikta savlaicīgi līdz darbadienas beigām un pārdevējs ir pāspējis to sagatavot izsūtīšanai ievietojot to pakomātā vai nodot kurjeram piegādei.

Cycplus DC1 Stationary Mini Rehabilitation Bike

Cycplus DC1 is a compact stationary rehabilitation bike with 10 resistance levels and two modes (Manual and ERG). The device has a standalone power system and takes up little space (only 0.18 sq. ft.), so you can use it at home, in the office and more. The built-in display and precise data measurement allow you to conveniently track your workout progress.

Mini rehabilitation bike on wooden floor

Two modes to suit different needs

The Cycplus DC1 mini bike offers two modes of operation. Manual, with 10 levels of resistance, will work well for warm-ups, rehabilitation and more intense exercises. Levels 1-3 are similar to walking, 4 to 6 resemble running, and 7 to 10 mimic cycling. ERG, on the other hand, allows you to set a target wattage between 30-100 watts - then the device automatically adjusts the resistance to your cadence. Choose the option better suited to your workout needs!

Hand adjusting the performance with the knob on the rehabilitation bike

Quiet operation and efficient drive train

The DC motor and worm gear used ensure smooth and stable operation with a noise level of only about 30 dB - that's about the same as a whisper or the ticking of a clock! The system's maximum power output is 160 watts, and the design self-generates power during exercise, eliminating the need to charge or plug in cables. So you can train where you want, when you want!

Small rehabilitation bike with visible power mechanisms on black background

Precise workout data

Cycplus DC1 is distinguished by a sampling rate of 2 ms, which translates into accurate and stable measurements of training parameters. The device's display shows calories, time, cadence, speed, distance, number of steps, as well as current and average power, among others. This allows you to consciously control your progress and adjust the intensity of your workouts to your capabilities.

Mini rehabilitation bike on a mat strapped to a stand

Pedaling in two directions

The device allows you to pedal forward and backward, which allows you to engage different muscle groups. Forward movement promotes circulation and calorie burning, while backward movement reduces stress on joints, ankles and spine. Such characteristics make the mini bike suitable for rehabilitation as well as for everyday, light physical activity, such as working at a desk or watching TV series.

Pedaling feet on mini rehabilitation bike

Impressive stability

The DC1 is equipped with a triple anti-slip system, including a mat, pads and an attachment belt, which stabilizes the device against the chair. The solutions used increase safety, reduce noise and prevent the equipment from moving during exercise.

Person working on a laptop at a table and using a small rehabilitation bike

Connectivity with workout apps

The DC1 bike supports the ANT+ protocol and allows you to connect with workout apps such as Zwift, MyWhoosh and CYCPLUS Fit. This allows you to track your progress, take part in virtual workouts, complete challenges and share your achievements.

Mini stationary bike on floor next to instructions and cardboard box

Ready to use after unpacking

The bike is ready to use almost right out of the box - no assembly or charging required. What's more, the integrated low-profile design makes the device space-saving and easy to carry. So you can easily use it under your desk at work or on an armchair in the living room, and stow it in a closet or under the couch after your workout.

Woman working on a laptop at a table and pedaling a small Cycplus bike

Included

  • Cycplus DC1 mini rehabilitation bike x1
  • Non-slip mat x1
  • Fastening belt x1
  • User manual x1

 

ManufacturerCycplus
ModelDC1
Operating modesManual, ERG
Number of resistance levels10
Power range in ERG mode30-100 W
Maximum power160 W
Noise levelApprox. 30 dB
Power supplyStand-alone power supply system
Sampling frequency2 ms
ConnectivityANT+
Supported applicationsZwift, MyWhoosh, CYCPLUS Fit, etc.
Bidirectional pedalingYes
DimensionsApprox. 50.3 × 35.3 × 21.1 cm
WeightApprox. 4.8 kg
Preču piegāde un saņemšana


Mēs zinām, ka laiks ir nauda. Tāpēc mūsu pamatpreces, tostarp pilns VIDEX LED gaismekļu sortiments, atrodas uz vietas mūsu noliktavā. Tas ļauj mums nodrošināt ātru un precīzu pasūtījumu apstrādi gan privātpersonām, gan B2B klientiem visā Baltijā.

Piegādes veidi:

    Pakomāti (Omniva, Venipak, LP Express / Unisend): Ērts un ātrs veids nelielu un vidēju preču saņemšanai sev vēlamā laikā.

    Kurjerpiegāde: Piegāde līdz jūsu mājokļa, biroja vai objekta durvīm. Ideāli piemērots lielākiem pasūtījumiem, instrumentiem un smagākām precēm.

    B2B un palešu piegāde: Liela apjoma pasūtījumiem un vairumtirdzniecības līgumklientiem nodrošinām palešu piegādi tieši uz jūsu objektu, ražotni vai noliktavu.

Pasūtījumi tiek apstrādāti un nodoti piegādei uzreiz pēc apmaksas saņemšanas (vai saskaņā ar B2B pēcapmaksas līgumu). Precīzas piegādes izmaksas tiek aprēķinātas automātiski pirkuma noformēšanas brīdī, balstoties uz preces izmēru un svaru.



Norēķinu un apmaksas kārtība


Vietnē opentools.lv mēs nodrošinām drošu un ātru pirkumu apmaksu. Maksājumu apstrādi nodrošina mūsu partneris MakeCommerce (Maksekeskus AS), garantējot augstākos datu drošības standartus.

Pieejamie apmaksas veidi:

    Internetbanka un maksājumu kartes: Ātri un droši norēķini ar VISA, Mastercard un populārākajām internetbankām (Swedbank, SEB, Citadele, Luminor u.c.).

    Apmaksa ar pārskaitījumu un B2B atliktais maksājums: Uzņēmumiem un pastāvīgajiem sadarbības partneriem (līgumklientiem) nodrošinām specializētu B2B sistēmu. Tā sniedz iespēju ērti veikt pasūtījumus un saņemt pēcapmaksas rēķinus jeb atlikto maksājumu. Sazinieties ar mums, lai noslēgtu sadarbības līgumu un iegūtu piekļuvi B2B platformai!

Visi norēķini tiek veikti eiro (EUR). Pasūtījuma apstrāde un preču sagatavošana piegādei tiek sākta uzreiz pēc veiksmīga norēķina vai atbilstoši B2B līguma nosacījumiem.