Portable foldable solar panel EcoFlow 60W (USB-C)
Portable foldable solar panel EcoFlow 60W (USB-C)
Prece:
SKU kods:
EFSOLAR60-TYPE-C
Svītru kods:
4895251629720
Pieejamība noliktavā:
Pēc pasūtījuma
Pieejamība piegādātāja noliktavā:
0 gab.
Cena:
€ 108.21
Prece nav pieejama no piegādātāja
Portable foldable solar panel EcoFlow 60W (USB-C)
EcoFlow's 60W foldable photovoltaic panel with USB-C (Universal Serial Bus Type C - a universal connector for charging and data transfer) enables fast charging of electronic devices and power stations from the EcoFlow RIVER 3 and RIVER 2 series. It achieves efficiency of up to 25% and is comparable in size to a laptop when folded. IP68 compliance means full dust and water resistance.
Direct device charging
The USB-C port allows direct connection of phones, powerbanks, laptops or air pumps without the need for a power station. The panel charges devices from 0 to 80% in the following time: a smartphone (4,500 mAh) in about 2.4 hours, a powerbank (8,000 mAh) in 2.7 hours, and a laptop (4,380 mAh) in 1.2 hours, ensuring convenient use in any situation.
High conversion efficiency
Enjoy shorter charging times and greater independence from traditional energy sources. Thanks to TOPCon (Tunnel Oxide Passivated Contact photovoltaic cells - a technology that increases the efficiency of the cell through better energy flow and less losses), the panel achieves up to 25% efficiency. As a result, the EcoFlow RIVER 3 station can take only 4.7 hours to charge (in full sunlight).
Lightweight and compact
The four-segment design allows for easy folding and transportation. When folded, the panel resembles the size of a laptop, allowing it to be conveniently stored in a backpack, SUV trunk or camper drawer. The product weighs only 2 kg, so it is not a burden when traveling.
Durability in harsh conditions
The panel's housing is made of layers of ETFE (Ethylene Tetrafluoroethylene - a durable fluoropolymer film with high UV and weather resistance) and fiberglass PCB (Printed Circuit Board - a laminated board with a conductive layer, used in electronics for stable assembly of components), which guarantees resistance to impact, wind and contact with water. IP68 certification means full protection from dust and resistance to immersion in water, making the panel a reliable companion on expeditions.
Suspension capability
The panel can not only be unfolded on the ground, but can also be hung on a car, tent or backpack using the 4 built-in mounting holes and the included hooks. Charging as you move allows you to make the most of your time and access to the sun.
Optimized performance
TOPCon cells are distinguished by lower power losses at high temperatures (up to 16.7% less than standard panels), longer life and no performance degradation over time (no photovoltaic degradation). The panel also works better in low-light conditions, extending the daily energy production time by up to an hour.
Included:
- Portable folding photovoltaic panel 60 W.
- DC5521 charging cable for XT60i
- Mounting hooks x4
- User manual
| Manufacturer | EcoFlow |
|---|---|
| Manufacturer code | EFSOLAR60-TYPE-C |
| Rated power | 60 W |
| Efficiency | Up to 25% |
| Short-circuit current | 2,06 A |
| Open circuit voltage | 25,6 V |
| Cell type | N-Type monocrystalline silicon with TOPCon technology |
| Dimensions when unfolded | 1356 × 309 × 25 mm |
| Dimensions when folded | 317 × 309 × 45 mm |
| Weight | 2 kg |
| Waterproof certification | IP68 |
Preču piegāde un saņemšana
Mēs zinām, ka laiks ir nauda. Tāpēc mūsu pamatpreces, tostarp pilns VIDEX LED gaismekļu sortiments, atrodas uz vietas mūsu noliktavā. Tas ļauj mums nodrošināt ātru un precīzu pasūtījumu apstrādi gan privātpersonām, gan B2B klientiem visā Baltijā.
Piegādes veidi:
Pakomāti (Omniva, Venipak, LP Express / Unisend): Ērts un ātrs veids nelielu un vidēju preču saņemšanai sev vēlamā laikā.
Kurjerpiegāde: Piegāde līdz jūsu mājokļa, biroja vai objekta durvīm. Ideāli piemērots lielākiem pasūtījumiem, instrumentiem un smagākām precēm.
B2B un palešu piegāde: Liela apjoma pasūtījumiem un vairumtirdzniecības līgumklientiem nodrošinām palešu piegādi tieši uz jūsu objektu, ražotni vai noliktavu.
Pasūtījumi tiek apstrādāti un nodoti piegādei uzreiz pēc apmaksas saņemšanas (vai saskaņā ar B2B pēcapmaksas līgumu). Precīzas piegādes izmaksas tiek aprēķinātas automātiski pirkuma noformēšanas brīdī, balstoties uz preces izmēru un svaru.
Norēķinu un apmaksas kārtība
Vietnē opentools.lv mēs nodrošinām drošu un ātru pirkumu apmaksu. Maksājumu apstrādi nodrošina mūsu partneris MakeCommerce (Maksekeskus AS), garantējot augstākos datu drošības standartus.
Pieejamie apmaksas veidi:
Internetbanka un maksājumu kartes: Ātri un droši norēķini ar VISA, Mastercard un populārākajām internetbankām (Swedbank, SEB, Citadele, Luminor u.c.).
Apmaksa ar pārskaitījumu un B2B atliktais maksājums: Uzņēmumiem un pastāvīgajiem sadarbības partneriem (līgumklientiem) nodrošinām specializētu B2B sistēmu. Tā sniedz iespēju ērti veikt pasūtījumus un saņemt pēcapmaksas rēķinus jeb atlikto maksājumu. Sazinieties ar mums, lai noslēgtu sadarbības līgumu un iegūtu piekļuvi B2B platformai!
Visi norēķini tiek veikti eiro (EUR). Pasūtījuma apstrāde un preču sagatavošana piegādei tiek sākta uzreiz pēc veiksmīga norēķina vai atbilstoši B2B līguma nosacījumiem.
