The Hcalory HBS-3S is a portable 8-kW parking heater equipped with a built-in 3.5-liter fuel tank. The unit can be powered from a 220–240 V AC outlet using the included power adapter, making it ideal for use in a RV, utility vehicle, trailer, tent, or workshop. The heater features controls via an LCD panel, remote control, and app, with fuel consumption of approximately 0.12–0.45 L/h and an automatic temperature control mode, allowing you to conveniently adjust the heating intensity to current conditions. The 8 kW power output and 3.5-liter tank capacity are listed in the official specifications for the HBS-3S model.
The HBS-3S features a modernized aluminum heat exchanger and an improved combustion chamber, which boost heating efficiency by approximately 18%. The unit begins to provide noticeable heat after about 3.5 minutes, and the outlet air temperature can reach approximately 100°C after 5 minutes of operation. With fuel consumption depending on the selected power level, the heater allows you to adjust the heating for both rapid interior warming and longer-term maintenance of a comfortable temperature.
The heater can be controlled in three ways—directly via the LCD panel, with a remote control, or through a mobile app. This solution allows you to change settings without having to approach the unit each time, which is particularly convenient when using it in a motorhome or while camping. The built-in temperature sensor works with the automatic start/stop function, helping to maintain the set temperature and reduce unnecessary fuel consumption.
The Hcalory HBS-3S features an automatic altitude mode for altitudes ranging from approximately 1,000 to 5,000 meters above sea level, which adjusts the air-to-fuel ratio to account for lower oxygen levels. This is useful when traveling in mountainous areas, where standard combustion settings may not ensure equally stable operation. Additionally, the maintenance mode uses high-temperature combustion to reduce carbon buildup, making it easier to keep the system in good condition with regular use.
The integrated design combines the heater and fuel tank in a single housing, making the unit easier to transport and eliminating the need to install a separate fuel tank. The unit comes with intake, air distribution, and exhaust system components, as well as a power supply, a 12/24 V wiring harness, and installation accessories, making it easy to set up a complete installation. The exhaust pipe must always be routed outside the heated space, and the heater must be used in accordance with the manufacturer’s instructions and with adequate ventilation.
| Manufacturer | Hcalory |
|---|---|
| Model | HBS-3S |
| Rated power | 8 kW |
| Fuel type | Diesel |
| Built-in tank capacity | 3.5 L |
| DC Power Supply | 12 V / 24 V |
| AC Power Supply – EU Version | 220–240 V |
| Fuel Consumption | approx. 0.12–0.45 l/h |
| Controls | app, remote control, LCD panel |
| Remote control range | up to approx. 30 m |
| App control range | up to approx. 10 m |
| Recommended heating area (manufacturer’s specification) | 20–25 m² |
| Altitude mode | automatic adaptation within the range of approx. 1,000–5,000 m above sea level |
| LCD panel extension cable length | 1.5 m |
| Weight | approx. 9.6 kg |
| Dimensions | approx. 48 × 21 × 41 cm |
Mēs zinām, ka laiks ir nauda. Tāpēc mūsu pamatpreces, tostarp pilns VIDEX LED gaismekļu sortiments, atrodas uz vietas mūsu noliktavā. Tas ļauj mums nodrošināt ātru un precīzu pasūtījumu apstrādi gan privātpersonām, gan B2B klientiem visā Baltijā.
Piegādes veidi:
Pakomāti (Omniva, Venipak, LP Express / Unisend): Ērts un ātrs veids nelielu un vidēju preču saņemšanai sev vēlamā laikā.
Kurjerpiegāde: Piegāde līdz jūsu mājokļa, biroja vai objekta durvīm. Ideāli piemērots lielākiem pasūtījumiem, instrumentiem un smagākām precēm.
B2B un palešu piegāde: Liela apjoma pasūtījumiem un vairumtirdzniecības līgumklientiem nodrošinām palešu piegādi tieši uz jūsu objektu, ražotni vai noliktavu.
Pasūtījumi tiek apstrādāti un nodoti piegādei uzreiz pēc apmaksas saņemšanas (vai saskaņā ar B2B pēcapmaksas līgumu). Precīzas piegādes izmaksas tiek aprēķinātas automātiski pirkuma noformēšanas brīdī, balstoties uz preces izmēru un svaru.
Vietnē opentools.lv mēs nodrošinām drošu un ātru pirkumu apmaksu. Maksājumu apstrādi nodrošina mūsu partneris MakeCommerce (Maksekeskus AS), garantējot augstākos datu drošības standartus.
Pieejamie apmaksas veidi:
Internetbanka un maksājumu kartes: Ātri un droši norēķini ar VISA, Mastercard un populārākajām internetbankām (Swedbank, SEB, Citadele, Luminor u.c.).
Apmaksa ar pārskaitījumu un B2B atliktais maksājums: Uzņēmumiem un pastāvīgajiem sadarbības partneriem (līgumklientiem) nodrošinām specializētu B2B sistēmu. Tā sniedz iespēju ērti veikt pasūtījumus un saņemt pēcapmaksas rēķinus jeb atlikto maksājumu. Sazinieties ar mums, lai noslēgtu sadarbības līgumu un iegūtu piekļuvi B2B platformai!
Visi norēķini tiek veikti eiro (EUR). Pasūtījuma apstrāde un preču sagatavošana piegādei tiek sākta uzreiz pēc veiksmīga norēķina vai atbilstoši B2B līguma nosacījumiem.