Portable solar panel, foldable 120W VIDEX VSO-F4120 | black – USB-A, Type-C and DC outputs for powering power stations outdoors

Portable solar panel, foldable 120W VIDEX VSO-F4120 | black – USB-A, Type-C and DC outputs for powering power stations outdoors

Product:
SKU Code:
VSO-F4120
Bar code:
4820246483681
Brand:
VIDEX
Availability in stock:
On order..
Price:
  • Power (W):
    120 +/-5%
  • Usage:
    Ārtelpas
  • Color:
    Melna+Oranža
  • Warranty:
    2
  • Measurements (LxWxH) (mm):
    420x540x60mm (atvērtā veidā 1670x540x30mm)
  • Material:
    Monokristālisks silīcijs + Oxford 600D ūdensizturīgs audums+PET
  • Weight (kg):
    3.76
  • Package (pcs.):
    5
  • Base:
    - DC: 18V, 5.5А (Max) (DC5521) - Type-C: 5V/9V/12V/15V/20V 3А (PD60W) - QC3.0 (USB1): 5V, 3А; 9V, 2А; 12V, 1.5А (18V) - USB (USB2): 5V, 3А (Max)
  • Rated voltage (V), frequency (Hz):
    18V, 5.5A
  • Operating temperature range (°C):
    -40°C ~ +65°C

During multi-day field operations, expedition base camps, and mobile utility service runs where operators must power not only smartphones but also field laptops, inspection drones, and autonomous power stations, low-wattage solar chargers fail to maintain a positive energy balance. Portable solar panel, foldable 120W VIDEX VSO-F4120 | black – USB-A, Type-C and DC outputs for powering power stations outdoors is a high-yield mobile generation hub uniting a 120W maximum solar output with a multichannel direct-current and rapid-charging terminal architecture. In its folded configuration, the unit forms a compact, briefcase-style profile (420 × 540 × 60 mm) with an integrated carry handle, unfurling in the field into an extensive 1.67-meter four-panel photovoltaic array engineered to directly charge laptops via a 60W Power Delivery terminal and replenish portable power stations via an 18V DC port.


The power architecture incorporates high-efficiency monocrystalline silicon cells boasting a 22% solar conversion efficiency rating, protected beneath a resilient PET barrier layer and embedded within waterproof 600D Oxford technical fabric. The rugged gray-orange textile chassis features integrated folding kickstands, enabling the operator to instantly angle the array at an optimal 45-degree angle toward the sun to maximize energy yield during morning and late afternoon hours. Built into the junction compartment is a versatile output matrix: a dedicated DC5521 terminal delivers 18V at up to 5.5A current (open-circuit voltage 21.5V, short-circuit current 6.0A), tailored for charging portable power stations (rated up to 300W input) and 12V storage batteries through the supplied 3-meter connection cable. Alongside the DC circuit, the panel incorporates a Type-C terminal with native Power Delivery (PD 60W) support (5V/9V/12V/15V/20V at 3A), allowing direct laptop and tablet charging in direct sunlight without intermediate power inverters. Smartphones and auxiliary gear are serviced by a Quick Charge 3.0 USB-A1 terminal (up to 18W) and a secondary USB-A2 terminal (5V/3A). An onboard microprocessor controller monitors operational thresholds across all ports, shielding attached electronics against thermal overload, short circuits, and voltage instability during intermittent cloud passage.


Technical Specifications and Operating Parameters

  • Physical Dimensions (mm): Folded transit dimensions 420 × 540 × 60 mm, unfolded operating dimensions 1670 × 540 × 30 mm with an optimized 3.76 kg weight for stability.
  • Four-Section Monocrystalline Matrix: High-grade silicon cell array yields a 22% conversion efficiency and 120W maximum rated power (Pm ±5%).
  • 600D Oxford Water-Repellent Chassis: Industrial-grade textile housing with a protective PET coating shields cells against moisture, abrasive grit, and transit shock.
  • Integrated Folding Kickstands: Rear support legs allow precise perpendicular orientation toward incoming solar rays to extract peak wattage.
  • Heavy-Duty DC5521 Output Terminal: DC 18V at up to 5.5A (Max) designed for direct replenishment of portable power stations and off-grid battery packs.
  • Electrical Parameters (Vmp/Imp): Maximum power voltage of 18V and operating current of 5.5A guarantee reliable energy flow under clear sky conditions.
  • Open-Circuit and Short-Circuit Limits: Voc of 21.5V and Isc of 6.0A ensure wide electrical compatibility with modern MPPT solar charge controllers.
  • USB-C Power Delivery (PD 60W): Supports 5V/3A, 9V/3A, 12V/3A, 15V/3A, and 20V/3A profiles for high-speed direct laptop and tablet charging.
  • Quick Charge 3.0 USB-A1 Terminal: Rapid mobile device charging delivering DC 5V/3A, 9V/2A, and 12V/1.5A profiles (maximum 18W output).
  • Secondary USB-A2 Output Port: Regulated DC 5V/3A line for parallel charging of communication radios, GPS units, and headlamps.
  • Extended 3 m Connection Cable: Generous wiring length permits placing the solar array in full sun while the charging power station or laptop rests in the shade.
  • Briefcase-Style Transport Ergonomics: Heavy-duty carrying handle, secure hook-and-loop fasteners, and an integrated zippered accessory storage pouch.
  • Package Deliverables: 120W foldable solar panel with kickstands, 3 m connection cable, and technical user manual.


Delivery and Shipping


We know that time is money. That is why our core products, including the full range of VIDEX LED lighting, are in stock in our warehouse. This allows us to ensure fast and accurate order processing for both private individuals and B2B clients across the Baltics.

Delivery methods:

    Parcel machines (Omniva, Venipak, LP Express / Unisend): A convenient and fast way to receive small and medium-sized goods at your preferred time.

    Courier delivery: Delivery right to the door of your home, office, or project site. Ideal for larger orders, tools, and heavier goods.

    B2B and pallet delivery: For large-volume orders and wholesale contract clients, we provide pallet delivery directly to your site, production facility, or warehouse.

Orders are processed and handed over for delivery immediately after receipt of payment (or in accordance with the B2B postpaid contract). Exact delivery costs are calculated automatically at checkout based on the size and weight of the items.



Payment Methods and Procedures

At opentools.lv, we provide secure and fast payment for your purchases. Payment processing is handled by our partner MakeCommerce (Maksekeskus AS), guaranteeing the highest data security standards.

Available payment methods:

    Online banking and payment cards: Fast and secure payments with VISA, Mastercard, and major online banks (Swedbank, SEB, Citadele, Luminor, etc.).

    Bank transfer and B2B deferred payment: For businesses and regular partners (contract clients), we provide a specialized B2B system. It allows you to place orders conveniently and receive postpaid invoices or deferred payments. Contact us to sign a partnership agreement and gain access to the B2B platform!

All payments are made in euros (EUR). Order processing and preparation for delivery begin immediately upon successful payment or in accordance with the terms of the B2B contract.