On construction jobsites, in mobile repair vehicles, during emergency utility response, and on extended wilderness camping expeditions where contractors must operate power tools and sensitive electronic instrumentation off-grid, standard combustion generators generate disruptive noise and damaging harmonic spikes. Portable power station 1800W 1229Wh VIDEX OASIS VPS-SG1-1KW8 | gray – pure sine wave and LiFePO4 battery for sensitive electronics is a multifunctional, highly dependable mobile energy hub. This powerplant delivers 1800W of continuous pure sine wave alternating current and safely sustains 3000W momentary surge peaks required to start circular saws, rotary drills, compact compressors, and water pump induction motors. Unlike bulky stationary domestic storage cabinets, this 22-kilogram chassis with molded side grab handles is engineered specifically for field mobility and effortless vehicle loading, delivering immediate mains-grade AC electricity wherever assignments demand.

The unit's electrochemical foundation utilizes advanced Lithium Iron Phosphate (LiFePO4) cells delivering 1229Wh of baseline energy storage. This chemical structure guarantees superior thermal stability and achieves over 3000 full charge and discharge cycles while retaining at least 80% of original rated capacity, translating into years of rigorous daily service without cell degradation. The chassis features internal structural aluminum bracing that firmly secures the cell arrays and inverter sub-assemblies, isolating them from heavy vibrations, drops, and mechanical stress during transit across unpaved terrain. The integrated inverter provides enterprise-level Uninterruptible Power Supply (UPS) functionality with a 14-millisecond transfer speed: upon a sudden grid outage, the station immediately assumes the electrical load, preventing desktop computers, test instrumentation, and network switches from shutting down. An intelligent AC Bypass operational mode channels grid electricity directly to connected appliances (up to 1800W at 10A current), entirely bypassing battery cycles whenever grid power is present.

Recharging from a standard 220V AC wall outlet draws up to 1200W, restoring the internal battery from 0% to 100% in approximately 1.5 hours (90 to 100 minutes). In remote off-grid locations, the integrated MPPT solar controller accepts up to 400W of photovoltaic input (DC 13–45V at 12A), securing complete energy independence when paired with portable solar arrays. The terminal layout provides comprehensive versatility: three pure sine wave 220–240V AC outlets (12A combined), two USB-C Power Delivery ports delivering up to 100W each for high-speed laptop operation, two Quick Charge 3.0 USB-A ports (18W), two standard USB-A ports (12W), an automotive 12.6V cigarette lighter socket (10A), and dual DC5521 barrel ports. Operating parameters, real-time input and output wattage, battery percentage, remaining runtime, and fault diagnostics are continuously displayed on a color LCD telemetry screen, while onboard Wi-Fi and Bluetooth connectivity enables remote circuit control and monitoring via the Life mobile application. A multi-tier side LED work light provides three brightness levels and an emergency SOS beacon for night operations.

Technical Specifications and Operating Parameters

• Physical Dimensions (mm): Chassis length 432 mm, width 270 mm, and height 300 mm with an optimized 22 kg mass for agile transport and field mobility.
• Integrated Grab Handles: Heavy-duty molded side handles ensure balanced lifting, loading, and repositioning across challenging jobsites.
• LiFePO4 Cell Architecture: Lithium Iron Phosphate cells deliver 3000 full charge/discharge cycles while preserving at least 80% of original capacity.
• Base Energy Storage (Wh): 1229Wh rated capacity provides sustained electrical runtimes for commercial power tools, electronics, and camp utilities.
• Pure Sine Wave Power Inverter: 1800W continuous output with a 3000W surge peak to start electric motors without harmonic distortion.
• Three 220V AC Outlets: 3x EU sockets (220–240V, 50Hz/60Hz, 12A) powering diagnostic instruments, power tools, and mobile base gear.
• Rapid 14 ms UPS Transfer: Automated uninterruptible power supply switches to battery within 14 milliseconds during grid dropouts to protect hardware.
• AC Bypass Operating Circuit: Directs utility grid current straight to connected loads up to 1800W (10A), preserving battery life when grid power is present.
• High-Speed Grid Replenishment (1200W): High-power AC charging circuit restores the internal battery from 0% to 100% in approximately 1.5 hours (90–100 minutes).
• Solar MPPT Input Terminal: DC 13–45V at 12A accommodates portable solar panels up to 400W for off-grid operational self-reliance.
• Automotive DC Charging Input: Onboard DC port accepts 12V or 24V vehicle battery input at up to 8A for recharging during vehicular transit.
• Dual 100W USB-C Power Delivery: 2x USB-C ports outputting up to 100W each (5V/9V/12V/15V at 3A, 20V at 5A) for high-speed laptop and tablet charging.
• Quick Charge USB-A Terminals: 2x USB-A QC3.0 ports (18W: 5V/3A, 9V/2A, 12V/1.5A) and 2x standard USB-A ports (12W: 5V/2.4A).
• Automotive and DC5521 Outputs: 1x car lighter port (12.6V/10A, 126W Max) and 2x DC5521 ports (12.6V/3A) with shared 126W power allocation.
• Color LCD Telemetry Display: Real-time screen monitors input/output wattage, charge percentage, remaining operational time, and status codes.
• Wireless Remote Supervision: Integrated Wi-Fi and Bluetooth hardware supports the Life application for remote switching and telemetry.
• Multi-Tier Workspace Light: Side-mounted LED illumination system provides three brightness settings and an emergency SOS flashing mode.
• Package Deliverables: 1800W portable power station, AC charging cable, car charging cable, and technical user manual.