LED Strip 5m roll for lighting DC 24V 60W (12W/m), 1440Lm/m, 6000K (cold white light) Ra98, IP20 VIDEX VL-LST28144-24126-B5 – Cuttable and connectable to the required size

Product:

SKU Code:

VL-LST28144-24126-B5

Bar code:

4820246489690

Brand:

VIDEX

Availability in stock:

On order..

Price:

Power (W):

60 (12W/m)
Luminous flux (lm):

1400Lm/m (120Lm/W)
Color temperature (K):

6000
Beam angle (°):

120
Usage:

Iekštelpas
Color:

Balta
Ingress protection:

IP20
Warranty:

3
Measurements (LxWxH) (mm):

5mx8mmx1.4mm
Material:

Varš
Weight (kg):

2
Package (pcs.):

120
Rated voltage (V), frequency (Hz):

DC 24V
Color rendering index (CRI):

Ra 98
Lifetime (h):

50000h
On/Off cycles:

30000
Operating temperature range (°C):

-20°C ~ + 60°С
Dimmable:

No

LED strip VIDEX DC24V 60W 5M 6000K Ra98 IP20 (VL-LST28144-24126-B5) is a low-voltage LED strip that has a copper board with LEDs, which provides excellent heat dissipation, uniform current distribution and increases the durability and performance of the strip. Operates from a 24V constant voltage power supply. The product has a full light spectrum: the light covers ultraviolet, visible and infrared radiation. The ratio of red, green and blue colors in the visible spectrum is similar to natural sunlight. The color rendering index is Ra98, which indicates a very high level of color rendition accuracy. The color temperature of the light is 6000K, so the strip emits daylight white light. This type of lighting is well suited for offices, work areas, classrooms, shop windows and other indoor spaces where bright and maximum clear lighting is important. The density of LEDs is 144 LEDs/m, which makes the strip very bright and uniform. The power of the LED strip is 12W per 1m, which is equivalent to 1440Lm/m, which makes it highly efficient. The scattering angle is 120°. The LED strip can be cut every 2.5cm (25mm), which allows it to maintain its performance after cutting each LED. The LED strip can only work in combination with a power supply, which can be found on our website under the article numbers VL-LST-P100-24V, VL-LST-P200-24V. The product warranty period is 3 years. INSTALLATION OF THE LED STRIP Installation should be performed only by a qualified specialist. For the best heat dissipation, install the strip on an aluminum profile or other heat-conducting surface. 1. Prepare the surface for installation by cleaning and degreasing it; 2. Use the built-in double-sided adhesive tape. Remove the protective film; 3. Press the tape firmly along the entire length. Allow the adhesive to cure; avoid mechanical stress. Notes: - Do not bend the tape sharply or twist it. - Minimum bend diameter of the tape: 30mm. - Ensure adequate ventilation around the tape; do not close it in tight spaces. - Check all mechanical and electrical connections before first use. CUTTING AND SPLICING THE LED STRIP Cutting, connecting or splicing or repairing the tape should be performed by a qualified specialist. Step-by-step instructions: 1) Cut the LED strip only at the marked cutting marks. 2) Solder the tape only on the copper contacts according to the instructions. 3) Ensure correct polarity when connecting the ribbon. After soldering, check for strength and electrical integrity.

Delivery and Shipping

We know that time is money. That is why our core products, including the full range of VIDEX LED lighting, are in stock in our warehouse. This allows us to ensure fast and accurate order processing for both private individuals and B2B clients across the Baltics.

Delivery methods:

Parcel machines (Omniva, Venipak, LP Express / Unisend): A convenient and fast way to receive small and medium-sized goods at your preferred time.

Courier delivery: Delivery right to the door of your home, office, or project site. Ideal for larger orders, tools, and heavier goods.

B2B and pallet delivery: For large-volume orders and wholesale contract clients, we provide pallet delivery directly to your site, production facility, or warehouse.

Orders are processed and handed over for delivery immediately after receipt of payment (or in accordance with the B2B postpaid contract). Exact delivery costs are calculated automatically at checkout based on the size and weight of the items.

Payment Methods and Procedures

At opentools.lv, we provide secure and fast payment for your purchases. Payment processing is handled by our partner MakeCommerce (Maksekeskus AS), guaranteeing the highest data security standards.

Available payment methods:

Online banking and payment cards: Fast and secure payments with VISA, Mastercard, and major online banks (Swedbank, SEB, Citadele, Luminor, etc.).

Bank transfer and B2B deferred payment: For businesses and regular partners (contract clients), we provide a specialized B2B system. It allows you to place orders conveniently and receive postpaid invoices or deferred payments. Contact us to sign a partnership agreement and gain access to the B2B platform!

All payments are made in euros (EUR). Order processing and preparation for delivery begin immediately upon successful payment or in accordance with the terms of the B2B contract.