All items

Start Products Flashlights and Headlamps Headlamps (Rechargeable)

Rechargeable LED Headlamp with Sensor CREE XTE 5W + COB, 410Lm 5000K, Li-ion 1800mAh, VIDEX VLF-H035C – Increased 410Lm output with wide flood and spot beams

Product:

SKU Code:

VLF-H035C

Bar code:

4820246481069

Brand:

VIDEX

Availability in stock:

> 10 pcs.

Rechargable headlamp (with included Type-C cable). Powerful headlamp model with also RED light! This model has ''MOTION SENSOR'', if such function is chosen, it switches ON and OFF with ''hand movements'' in front of it! (simple hand swing will trun it on and off).

Price:

1 pcs.

€ 23.90

≥ 2 pcs.

€ 21.51

- +

Delivery time at the pickup address:

To our warehouse:

In our stock

Shipping company:

working days

Total days:

working days

Today 05.07.2026

Shipping cost:

€ 0.00

Shipping time to parcel box:

To our warehouse:

In our stock

Shipping company:

working days

Total days:

working days

Tuesday 07.07.2026

Shipping cost:

From € 2.50

Shipping time by courier:

To our warehouse:

In our stock

Shipping company:

working days

Total days:

working days

Wednesday 08.07.2026

Shipping cost:

From € 4.90

In order for above mentioned delivery dates by parcel locker and courier to be met, order has to been placed in time and seller has managed to send it out by the end of working day.

Power (W):

LED CREE XTE 5W + COB
Luminous flux (lm):

410
Color temperature (K):

5000
Usage:

Iekštelpas/Ārtelpas
Color:

Melna
Ingress protection:

IP65
Impact protection:

Fall protection: 1 m
Warranty:

2
Measurements (LxWxH) (mm):

46x70x38
Material:

Poliamīds, neilons, polikarbonāts,
Weight (kg):

0.108
Package (pcs.):

20
Base:

Input interface: Micro USB
Rated voltage (V), frequency (Hz):

DC 5V, 0.8A, 1800 mAh
Lifetime (h):

Battery repleceable: no, Full discharge time: 23 h, Battery voltage: 3.7 V, Full charge time: 3.5 h
Diffuser material:

Magnetic base: No, Lens material: Polycarbonate (PC), Reflector surface: Smooth
Operating temperature range (°C):

-20° +40°C
Dimmable:

Operation mode: HIGH,LOW,RED ON,RED FLASH,COB + HIGH,COB HIGH,COB LOW,FLASH

MAIN FEATURES

* Built-in motion sensor for swift turning on/off

* Water resistance IP65 (protected from all precipitation)

* Micro USB charging port

* Red light preserves night vision

* Additional low beam COB LED

INCLUDED

• Headlamp VLF-H035C;

• Charging cable;

• Nylon headband;

• User’s manual

LIGHTING MODES

High – main light maximum brightness

Low – main light minimum brightness

COB – low beam light maximum brightness

COB+HIGH – total maximum brightness

Strobe – main light flashing light

Red on – constant red light

Red flash – flashing red light

OPERATING INSTRUCTION

Short press ON button – turn on the light, switch between modes and turn off the light cyclically.

Note. The mode selection performs within 5 seconds. After this time, the next short press will turn the light off . The headlamp automatically memorizes the last selected lighting mode and applies it next time when turned on.

Long press (0.5 seconds) ON button – turn on/off the secondary COB light.

Short press SENSOR button with the light switched off - activate the sensor HIGH mode or the sensor COB mode. After that, you can turn on/off the light by hand waves closely to the device.

Short press SENSOR button with the light switched on - remember current lighting mode and later switch it on/off by the sensor.

BATTERY STATUS INDICATION

Press and hold the SENSOR button for 0.5 seconds to see the battery status. The indication will last for 2 seconds. The battery status is also continuously displayed when the light is turned on.

5 divisions - ≤100% charge;

4 divisions - ≤80% charge;

3 divisions - ≤60% charge;

2 divisions - ≤40% charge;

1 division - ≤20% charge;

1 division flashes – battery discharged

CHARGING

Plug the USB-A socket of the charging cable into the electrical outlet. Switch off the light, open the protective cover and connect the charging cable to the flashlight port.

When charging, the divisions flash indicating the current battery level.

When fully charged, all 5 indicator bars are constantly on.

After a full charge, unplug the charging cable and close the protective cover to prevent water and dust from entering the headlamp body.

© The original rechargeable batteries are supplied charged and can be used immediately after purchase, however it is recommended that the battery be fully charged before first use. The battery needs to be charged in time before it is completely discharged. During long periods of storage, it is recommended to keep the battery charging level at about half capacity to extend its service life.

Delivery and Shipping

We know that time is money. That is why our core products, including the full range of VIDEX LED lighting, are in stock in our warehouse. This allows us to ensure fast and accurate order processing for both private individuals and B2B clients across the Baltics.

Delivery methods:

Parcel machines (Omniva, Venipak, LP Express / Unisend): A convenient and fast way to receive small and medium-sized goods at your preferred time.

Courier delivery: Delivery right to the door of your home, office, or project site. Ideal for larger orders, tools, and heavier goods.

B2B and pallet delivery: For large-volume orders and wholesale contract clients, we provide pallet delivery directly to your site, production facility, or warehouse.

Orders are processed and handed over for delivery immediately after receipt of payment (or in accordance with the B2B postpaid contract). Exact delivery costs are calculated automatically at checkout based on the size and weight of the items.

Payment Methods and Procedures

At opentools.lv, we provide secure and fast payment for your purchases. Payment processing is handled by our partner MakeCommerce (Maksekeskus AS), guaranteeing the highest data security standards.

Available payment methods:

Online banking and payment cards: Fast and secure payments with VISA, Mastercard, and major online banks (Swedbank, SEB, Citadele, Luminor, etc.).

Bank transfer and B2B deferred payment: For businesses and regular partners (contract clients), we provide a specialized B2B system. It allows you to place orders conveniently and receive postpaid invoices or deferred payments. Contact us to sign a partnership agreement and gain access to the B2B platform!

All payments are made in euros (EUR). Order processing and preparation for delivery begin immediately upon successful payment or in accordance with the terms of the B2B contract.