LED flashlight, rechargeable 230Lm 6500K 1200mAh TITANUM TLF-T03 | black – optical zoom for beam focusing

LED flashlight, rechargeable 230Lm 6500K 1200mAh TITANUM TLF-T03 | black – optical zoom for beam focusing

Product:
SKU Code:
TLF-T03
Bar code:
4820246483285
Brand:
TITANUM
Availability in stock:
On order..

Rechargable. This product is chargable directly with USB-A port (screwable end cap). It also has ZOOM funcition. There is built-in Li-ion 18650, 1200mAh battery (no replacable!)



Price:
1 pcs.
€ 10.90
≥ 2 pcs.
€ 9.81
Product on order..
  • Power (W):
    4
  • Luminous flux (lm):
    230
  • Color temperature (K):
    6500
  • Usage:
    Iekštelpas/Ārtelpas
  • Color:
    Melna
  • Ingress protection:
    IP44
  • Motion sensor:
    Nav
  • Warranty:
    2
  • Measurements (LxWxH) (mm):
    112mm х 27mm х 25mm
  • Material:
    Alumīnija sakausējums
  • Weight (kg):
    0.089
  • Base:
    Input interface: USB-A
  • Rated voltage (V), frequency (Hz):
    DC 5V, 0.8A, (built-in Li-ion 18650, 1200 mAh)
  • Operating temperature range (°C):
    -20° +40°C
  • Dimmable:
    Operation mode: Zoom funkcija + Maximum, minimum, strobe, SOS

In routine technical operations, automotive maintenance in confined engine bays, or everyday carry (Everyday Carry or EDC), a pocket-sized light fixture featuring beam geometry adjustment and impact tolerance is essential. LED flashlight, rechargeable 230Lm 6500K 1200mAh TITANUM TLF-T03 | black – optical zoom for beam focusing is a precision handheld torch engineered with an anodized aluminum body and telescopic optics. This model combines pocketable portability with a robust solid-state diode to provide dependable illumination for both close-up assembly and long-distance observation.


The central functional element is the sliding telescopic optical lens, which enables single-handed adjustment of the beam angle. In wide-angle configuration, the T6 diode floods the peripheral field without harsh edge falloff, essential for electrical cabinets and workbench tasks. Extending the bezel forward concentrates the 230Lm luminous flux into an intense, piercing beam capable of reaching distances up to 170 meters. The 6500K cool white daylight tone delivers sharp optical definition and contrast. The chassis features an integrated USB connector positioned beneath a threaded rear tailcap fitted with an O-ring seal, eliminating the need for dedicated charging cables. The internal 1200mAh lithium-ion (Li-ion 18650) battery pack recharges within 3 hours. Its aluminum architecture withstands 1-meter drops and meets IP44 splash protection standards, while four distinct operation modes (High, Low, Flash, and a 3-second hold SOS emergency mode) adapt to variable conditions.


Technical Specifications and Operating Parameters

  • Physical Dimensions (mm): Overall length 112 mm, bezel diameter 27 mm, and body diameter 25 mm with a combined mass of 89 g ensure effortless pocket carry.
  • Optical Zoom Mechanics: Smooth telescopic bezel slide transitioning between uniform flood and focused long-range spot.
  • Emitter Technology: High-efficiency T6 crystal LED module delivering 230Lm calibrated output.
  • Maximum Throw Distance: Refracted optical beam reaches up to 170 m of clear visibility at full concentration.
  • Color Temperature: 6500K (cool white spectral profile offering enhanced contrast for mechanical inspections).
  • Aviation-Grade Chassis: Machined aluminum alloy treated with matte black anodizing resistant to wear and abrasion.
  • Impact Tolerance: Ruggedized structure tested to endure direct impacts and drops from up to 1 m.
  • Ingress Protection: IP44 standard shields inner electronics against splashing water and particulates over 1 mm.
  • Direct USB Terminal: Integrated male USB connector protected under a sealed screw-cap for direct plugging into USB ports.
  • Lithium Power Source: Internal Li-ion 18650 cell offering 1200mAh capacity, restoring fully in 3 hours (5V, 0.5A).
  • Multi-Mode Interface: Four profiles – High output, Low power-save, Flash signaling, and emergency SOS via a 3-second hold.
  • Bicolor Indicator: Integrated status LED shifts from red to green when full charge termination is achieved.
  • Package Deliverables: Anodized aluminum EDC pocket torch and technical instruction manual.


Delivery and Shipping


We know that time is money. That is why our core products, including the full range of VIDEX LED lighting, are in stock in our warehouse. This allows us to ensure fast and accurate order processing for both private individuals and B2B clients across the Baltics.

Delivery methods:

    Parcel machines (Omniva, Venipak, LP Express / Unisend): A convenient and fast way to receive small and medium-sized goods at your preferred time.

    Courier delivery: Delivery right to the door of your home, office, or project site. Ideal for larger orders, tools, and heavier goods.

    B2B and pallet delivery: For large-volume orders and wholesale contract clients, we provide pallet delivery directly to your site, production facility, or warehouse.

Orders are processed and handed over for delivery immediately after receipt of payment (or in accordance with the B2B postpaid contract). Exact delivery costs are calculated automatically at checkout based on the size and weight of the items.



Payment Methods and Procedures

At opentools.lv, we provide secure and fast payment for your purchases. Payment processing is handled by our partner MakeCommerce (Maksekeskus AS), guaranteeing the highest data security standards.

Available payment methods:

    Online banking and payment cards: Fast and secure payments with VISA, Mastercard, and major online banks (Swedbank, SEB, Citadele, Luminor, etc.).

    Bank transfer and B2B deferred payment: For businesses and regular partners (contract clients), we provide a specialized B2B system. It allows you to place orders conveniently and receive postpaid invoices or deferred payments. Contact us to sign a partnership agreement and gain access to the B2B platform!

All payments are made in euros (EUR). Order processing and preparation for delivery begin immediately upon successful payment or in accordance with the terms of the B2B contract.