High Power Industrial LED Bulbs
Filter
Clear filter
High Power Industrial LED Bulbs provide excellent lumen restoration in existing production and warehouse domes with an efficient active and passive cooling system.
Lighting large industrial spaces, hangars, and logistics centers requires a strong and sustainable light source. When the housings of existing industrial luminaires (for example, High Bay type domes) are in good technical condition, but the old sodium or mercury bulbs are worn out, the most rational solution is a direct Retrofit replacement. The VIDEX high-power series (A96, A108, T38F, and T52F shapes) offers an extremely powerful emission in the range of 30W to 50W and more, creating a luminous flux of up to 5400 lumens. These bulbs are designed with a reinforced heat-dissipating aluminum radiator because prolonged high-power operation creates a critical thermal load on the internal components. They are equipped with broadband IC drivers that can absorb voltage surges in the electrical grid and protect the expensive matrix circuit from burnout, guaranteeing at least 20,000 hours of continuous working resource without the stroboscopic flickering effect.
Technical specifications and industrial efficiency:
- Standard base adapters: The bulbs use a standard E27 thread, but high-power models use adapters to the E40 standard, ensuring compatibility with large-sized industrial sockets.
- Thermal protection: The integrated perforated aluminum cooler dissipates accumulated heat even in closed or semi-closed domes, preventing the rapid degradation of SMD diodes.
- Wide scattering angle: The 330-degree light angle (for T38F/T52F models) uniformly illuminates wide warehouse aisles and work halls, maximally avoiding the formation of sharp shadows.
- High energy efficiency: The reduction in electricity consumption is up to three times greater compared to classic discharge bulbs, significantly optimizing the company's expenses.
The bulb serves only as an insertable spare part, allowing the room's brightness to be restored quickly and without massive dismantling. For effective power management and switching on of industrial lines, engineeringly suitable black surface-mounted switches and sockets will perfectly serve.
Q: In which industrial and commercial spaces is it engineeringly justified to install high-power (30W–100W+) E27 and E40 bulbs?
Q: How do the passive aluminum finned radiator and active protection circuits prevent high-power bulbs from overheating?
Q: How do surge protection varistors (2.5kV–4kV) protect E40 industrial bulbs in electrical workshops?
Q: What is the physics of energy savings when replacing 250W–400W gas-discharge lamps with 60W–100W LED E40 technology?
Q: What are the safe mounting and weight requirements when installing massive E40 high-power bulbs in industrial fixtures?
A: High-power LED bulbs generate from 3000 up to 10,000 lumens, which is critically needed in production halls, high-ceiling warehouses (6-12 meters), and street lighting luminaires. They provide a lux density compliant with the EN 12464-1 standard in work zones without the need to change the industrial dome housing itself.
Q: How do the passive aluminum finned radiator and active protection circuits prevent high-power bulbs from overheating?
A: The massive aluminum casting increases the cooling surface area, dissipating the enormous heat generated by 100W through natural convection. Many models also incorporate thermo-regulation circuits that automatically reduce the supply current if the internal housing temperature approaches the critical 85°C point.
Q: How do surge protection varistors (2.5kV–4kV) protect E40 industrial bulbs in electrical workshops?
A: The varistor block integrated into VIDEX high-power models absorbs sudden high-voltage pulses (up to 4kV) occurring in industrial grids during the startup of heavy electric motors. This isolates the bulb's IC driver from instantaneous physical burnout and prevents production downtime risks.
Q: What is the physics of energy savings when replacing 250W–400W gas-discharge lamps with 60W–100W LED E40 technology?
A: An 80W LED E40 bulb with a 130 lm/W efficacy generates the same useful light volume as an old 250W sodium (HPS) lamp, while eliminating upward light scattering and ballast heating losses. This allows reducing the enterprise's lighting grid load and bills by approximately 70%.
Q: What are the safe mounting and weight requirements when installing massive E40 high-power bulbs in industrial fixtures?
A: Since the bulb's weight can exceed 500 grams due to the aluminum cooling radiators, old plastic or ceramic fixtures must be checked for fixation safety against vibrations. A strict engineering standard requires using support cables or clamps in horizontal installations to prevent weight-induced thread breakage over the years.
