Recessed Small LED Panels
Filter
Clear filter
Recessed Small LED Panels offer flawless concealed installation in drywall, creating a clean and unobtrusive lighting design in a modern interior.
Low false ceilings and air conditioning equipment often leave minimal cavity for lighting installation. Standard cylindrical housings can come into contact with vapor barriers and cause mechanical problems that can threaten the safety of the building. The recessed flat optics luminaire line guarantees low-profile physics (deep-recessed alternative), saving every valuable millimeter behind drywall or stretch ceilings. VIDEX engineers have equipped these devices with particularly durable fixation springs and specified precise mounting cutout diameters, which significantly facilitates electricians' work and prevents panel movement in case of vibrations. The power converter is always integrated or conveniently hidden above the ceiling, guaranteeing an absolutely uniform light output (No Flicker).
Pros of concealed flat mounting:
- Maximum blending: The outer ring of the device tightly fits the ceiling plane, making the lens an aesthetic and unified part of the spatial architecture.
- Mounting safety: Spring catches pull the module with the necessary tension without pressing fragile drywall edge segments.
- Space saving: The thickness of the rear cooling panel does not exceed a couple of centimeters, allowing wires to be organized in very narrow niches.
- Energy efficiency: Wide scattering angle LED diodes create a strong lumen output with minimal power consumption, maintaining a cold operating environment.
Creating such installations guarantees long-lasting and visually seamless light management in any project. To maintain a unified electrical installation design for adjacent utility rooms, a safe and visually justified solution is Waterproof Outdoor Switches and Sockets.
Q: How to correctly choose the mounting hole (cut-out) diameter for small recessed LED panels?
Q: How do VIDEX small recessed panels prevent the crumbling of drywall edges during prolonged operation?
Q: How much airspace is required behind the drywall when installing a small recessed LED panel?
Q: Can small recessed panels be installed in damp rooms under drywall ceilings?
Q: How to safely connect multiple small recessed LED panels in a single chain behind the drywall?
A: The mounting hole diameter in millimeters is specified in the luminaire's documentation and is 15–20 mm smaller than the panel's outer frame. This difference allows the decorative trim to fully cover the ragged edges of the drywall (GKB) opening, ensuring a tight fit to the ceiling plane.
Q: How do VIDEX small recessed panels prevent the crumbling of drywall edges during prolonged operation?
A: panels use high-elasticity steel springs with plasticized protective caps. The flexible fixation mechanics evenly distribute the pressure force along the inner perimeter of the plasterboard, preventing material crumbling even after repeated luminaire dismantling.
Q: How much airspace is required behind the drywall when installing a small recessed LED panel?
A: The minimum safety clearance between the drywall sheet and the base ceiling is 30 to 50 millimeters. This free space is necessary for passive air convection and for housing the external power supply, preventing the thermal overload of the cable insulation.
Q: Can small recessed panels be installed in damp rooms under drywall ceilings?
A: For damp zones (like bathrooms), panels with at least an IP44 protection class from the front must be chosen. A silicone seal between the frame and the glass prevents capillary penetration of water vapor into the optical chamber, while the rear part must be provided with a dry microclimate.
Q: How to safely connect multiple small recessed LED panels in a single chain behind the drywall?
A: All recessed panels must be connected in a parallel circuit using WAGO-style lever terminals at each power supply connection point. A parallel connection provides each transformer with precise 230V alternating current, guaranteeing that the failure of one node will not interrupt the operation of the rest of the panels.
