Universal Chargers
Filter
Clear filter
Universal chargers guarantee safe and fast restoration of power elements.
Smart multi-chemistry chargers are an engineering achievement that allows serving both 1.48V Ni-MH cells and 4.2V Li-Ion and 3.65V LiFePO4 elements in a single device. The UT600 model is equipped with four independent channels, allowing synchronous charging of different formats. The device offers a choice of charging current (200mA to 2000mA) and a Refresh function for deeply discharged batteries. The informative LCD screen shows real-time statistics on internal resistance, time, and loaded milliampere-hours (mAh), making it indispensable for maintaining measuring instruments.
Physical and technical advantages:
- Universal architecture: Combines Ni-MH and Li-Ion technology in one working device.
- Diagnostic function: Ability to revive (Refresh) deeply depleted capacities.
- Independent channels: Each slot charges the element isolatedly and maintains its own voltage cycle.
The integration of a single universal charger in the workshop provides freedom of action for any electronic situation. To keep these universal charging devices always easy to organize and carry, explore our practical Flashlight Accessories solutions. Safety standards require the use of only certified and tested elements in the equipment. Properly selected components that meet technical specifications significantly extend the operating cycle of the hardware in extreme working conditions. Careful selection of materials and engineering during the manufacturing process ensure maximum reliability and safety in all technical application scenarios. This analytical approach is fundamental to today's demanding industrial needs, where there is no room for error and where energy efficiency is always a primary requirement for any reliable system. This allows for significant resource savings in the long run, guaranteeing safety.
Q: How do universal chargers automatically recognize 1.2V Ni-MH / Ni-Cd and 3.7V Li-Ion accumulator electrochemistry?
Q: Why is it possible to manually or automatically select the charging current (0.5A, 1A, 2A) in universal chargers?
Q: How do LCD or LED screens improve charging process monitoring in universal chargers?
Q: Can protected (Protected Button-Top) 18650 Li-Ion accumulators also be charged in universal chargers?
Q: What should be done if a universal charger fails to recognize a deeply discharged 1.2V Ni-MH accumulator that has dropped below 0.5V?
A: Upon inserting an accumulator into a slot, the microprocessor precisely measures the cell's Open Circuit Voltage. An element with a voltage below 1.6V is classified as 1.2V Ni-MH/Ni-Cd, whereas a voltage above 2.0V activates the VIDEX 3.7V Li-Ion (charge up to 4.20V) protocol, eliminating the risk of applying wrong voltage.
Q: Why is it possible to manually or automatically select the charging current (0.5A, 1A, 2A) in universal chargers?
A: Accumulators of different sizes have different maximum charging capacities and C-ratings (charge/discharge rates). Supplying 2A current to a small 10440 Li-Ion element will overheat it, while charging a large 21700 accumulator at 0.5A will take over 10 hours, so adjusting current maintains an optimal charge and heat balance.
Q: How do LCD or LED screens improve charging process monitoring in universal chargers?
A: Precise LCD displays show cell voltage in millivolts (V), charging current (mA), loaded capacity (mAh), and internal resistance (mΩ) in real time. This telemetry data allows engineers or users to evaluate accumulator health and identify degraded elements with heavily increased internal resistance in a timely manner.
Q: Can protected (Protected Button-Top) 18650 Li-Ion accumulators also be charged in universal chargers?
A: Yes, mechanical slider springs are designed with an extended travel capable of accommodating elements up to 72-75 mm long. This ensures reliable mechanical contact with both regular Flat-Top (65 mm) and longer Button-Top models featuring an integrated PCB/BMS microchip.
Q: What should be done if a universal charger fails to recognize a deeply discharged 1.2V Ni-MH accumulator that has dropped below 0.5V?
A: In cases of deep discharge, the smart microchip may mistakenly fail to initiate the charging process due to protection considerations. In this situation, the accumulator should be temporarily connected in parallel with another full 1.2V element or the charger's manual Forced Activation button should be used to raise the voltage slightly above the 0.9V recognition threshold.
