LED headlamp VIDEX VLF-H046Z, 500Lm 5000K has powerful WHITE and also RED/GREEN light. Thanks to the presence of 12 modes, beam focusing function, dust and moisture protection class (IP65), drop protection class up to 2m and the ability to adjust the angle of inclination, it has a large number of scenarios for use.
You can control the flashlight modes both using the buttons on its body and using hand waves thanks to the presence of a motion sensor. The flashlight is powered by a built-in Li-pol battery with a capacity of 1200mAh.
FLASHLIGHT CONTROL
The flashlight is controlled using a rotary switch, side and touch buttons, and a light beam focusing mechanism.
1. Turning on the light and switching between brightness modes is done by rotating the rotary switch. To turn the light on at the lowest brightness level, turn the switch one step forward "away from you". To increase the brightness, continue to turn the switch. This allows you to quickly switch between modes.
2. Switch between colors by pressing and holding the side button of the flashlight for 0.5 seconds.
3. To activate the motion sensor mode, press the sensor button on the flashlight, located on the top of its body, once. The indicator next to the sensor button will light up to indicate that the sensor is on. While the sensor is active, wave your hand once about 5 cm in front of the flashlight to temporarily turn it off. Wave your hand again to turn it back on in the last selected mode.
4. To deactivate the motion sensor, press the sensor button once or turn the rotary switch all the way "towards you".
5. To adjust the angle of the light beam, turn the focusing mechanism to the right or left.
6. To turn the flashlight off, turn the rotary switch all the way to the "on" position.
FLASHLIGHT OPERATION MODES
TURBO (Turbo mode) - with the highest white light brightness of 500Lm. Lighting distance is 60m. Operating time is 3h. Luminous flux intensity is 920cd.
HIGH (Maximum brightness white light mode) - light brightness is 300Lm. Lighting distance is 50m. Operating time is 4h. Luminous flux intensity is 950cd.
MIDDLE (Medium brightness white light mode) - light brightness is 100Lm. Lighting distance is 30m. Operating time is 6h. Luminous flux intensity is 250cd.
LOW (Minimum brightness white light mode) – light brightness 25Lm. Lighting distance is 15m. Operating time 25h. Luminous flux intensity 40cd.
RED HIGH (Maximum brightness red light mode) – light brightness 70Lm. Lighting distance is 25m. Operating time 4h. Luminous flux intensity 130cd.
RED MIDDLE (Medium brightness red light mode) – light brightness 20Lm. Lighting distance is 10m. Operating time 18h. Luminous flux intensity 12cd.
RED LOW (Minimum brightness red light mode) – light brightness 5Lm. Lighting distance is 2m. Operating time 50h. Luminous flux intensity 1cd.
RED FLASH (Red flashing light mode) – light brightness 5Lm. Lighting distance is 2m. Operating time 70h. Light intensity 1cd.
GREEN HIGH (Green light mode of maximum brightness) – light brightness 70Lm. Lighting distance is 25m. Operating time 8h. Light intensity 120cd.
GREEN MIDDLE (Green light mode of medium brightness) – light brightness 20Lm. Lighting distance is 10m. Operating time 28h. Light intensity 12cd.
GREEN LOW (Green light mode of minimum brightness) – light brightness 5Lm. Lighting distance is 2m. Operating time 124h. Light intensity 1cd.
GREEN FLASH (Green Flashing Light Mode) – 5Lm light brightness. Lighting distance is 2m. Operating time 173h. Luminous flux intensity 1cd.
The flashlight automatically remembers the last selected color and restores it each time it is turned on until another color is selected.
CHARGING
The flashlight is charged using the USB-C charging cable supplied in the kit. To charge the flashlight, turn it off and remove the protective silicone cover. Connect the USB-A end of the charging cable to the charger, and the other end to the input port of the headlamp. During charging, the indicator divisions will flash, showing the current battery charge level. After a full charge, all divisions will be constantly lit. After charging, disconnect the cable and close the protective cover tightly to prevent water and dust from entering the headlamp. WARNING! It is strictly forbidden to use the headlamp while charging.
When the headlamp is off, pressing the side button once activates the charge level indicator in the form of scales located on the bottom of the body near the charging connector. The indicator remains visible for 3 seconds if not turn off earlier by pressing the power button again.
- Four divisions glow green when fully charged (100-75%).
- Three divisions glow green when fully charged (74-50%).
- Two divisions glow green when 49-25% charged.
- One division glows green when 24-1% charged.
The warranty period is 2 years for the flashlight. The warranty does not apply to accessories.