LED Rechargeable Night Light with motion sensor VIDEX VL-NL108W is designed for local lighting of residential spaces, wardrobes, bookshelves, and other areas. It can automatically illuminate a specific area by detecting motion using the built-in sensor. It features two light sources: a front long-range light that can be used as a flashlight, and a side short-range light that can be used as a night light. The front light has several operating modes: High, Medium, Low, and SOS. This model allows you to change the color temperature of the side light (3000K–4000K–6500K) and adjust the brightness level of both light sources. The light can be easily mounted on both metal and non-metal surfaces. ADVANTAGES AND FEATURES OF THE LIGHT: - presence of front and side light - flexible lighting mode settings - built-in Li-ion battery 3.7V, 2000mAh - USB-C charging - charging time – 2 hours 30 minutes - built-in infrared motion sensor (PIR sensor) - sensor detection angle – 120° detection distance – <6m - luminous flux of front light – 110Lm (Max), side light – 50Lm (Max) - color temperature of front light – 6500K, side light – 3000K / 4000K / 6500K - power – 2W - operating time of front light – up to 7 hours; side light – up to 17 hours PACKAGE CONTENTS: 1) Light 2) Magnetic base 3) Adhesive pads (2 pcs.) 4) Screws (2 pcs.) 5) Charging cable 6) User manual 7) Packaging MOUNTING METHODS: a) Mounting on metal surfaces: attach the magnetic base included in the package to a metal surface. Install the light onto the magnetic base. b) Mounting on non-metal surfaces: attach the magnetic base using the adhesive pads or screws included in the package. Install the light onto the magnetic base. OPERATING INSTRUCTIONS: There are 3 control buttons on the light housing: 2 sliders near the charging port and 1 function button near the magnetic base. Using the mode switch slider «OFF-ON-AUTO» on the light housing, you can turn the light on and off and activate the motion sensor mode. It is located closer to the charging port. 1) To turn on the light, move the slider to the «ON» position. 2) To activate motion sensor mode, move the slider to the «AUTO» position. In this mode, the light turns on when motion is detected in low light conditions and automatically turns off approximately 20 seconds after motion is no longer detected. 3) To turn off the light, move the slider to the «OFF» position. Using the light source selector slider on the light housing, you can turn on the front light, side light, or both simultaneously. The light source selector is located near the «OFF-ON-AUTO» mode switch. - To turn on the front light, move the slider to the left of the «ALL» marking. - To turn on both front and side lights simultaneously, move the slider to the «ALL» position. - To turn on the side light, move the slider to the right of the «ALL» marking. Brightness and color temperature are controlled using the function button near the magnetic base. I. Switching between front light modes: when the front light is on, briefly press the function button to switch between High, Medium, Low, and SOS modes. II. Changing the light color: when the side light is on, briefly press the function button to switch between Warm White (3000K), Neutral White (4000K), and Daylight White (6500K). III. Brightness adjustment: when the light is on, press and hold the function button to smoothly adjust brightness. When the light reaches the maximum or minimum brightness level, it will flash once. CHARGING: Connect the USB-A end of the charging cable to a power adapter and the other end to the charging port of the light. During charging, the indicator lights up red. When fully charged, the indicator lights up green. It is recommended to fully charge the battery before first use. WARNING! It is strictly prohibited to use the light while charging! For long-term storage, it is recommended to leave the battery partially charged to extend its service life. Do not store the product with a discharged battery. Store the set in a dry place away from direct sunlight. The warranty period is 2 years.