LED Solar Floodlight with motion sensor VIDEX VL-FSO4-205-S 1400Lm 5000K
LED Solar Floodlight with motion sensor VIDEX VL-FSO4-205-S 1400Lm 5000K
Product:
Price:
€ 29.90
Item is not available
-
Jauda (W):96Wh
-
Gaismas plūsma (lm):3740
-
Krāsas spektrs (K):5000
-
Stara leņķis (°):90
-
Pielietojums:Ārtelpas
-
Krāsa:Pelēka
-
Mitruma aizsardzības klase:IP65
-
Triecienu aizsardzības klase:IK07
-
Sensors:No
-
Garantija:2
-
Produkta izmēri (GxPxA) mm:314x273x45
-
Materiāls:Alumīnijs
-
Svars (kg):4.37
-
Skaits iepakojumā (gab.):5
-
Nominālais spriegums (V), frekvence (Hz):Battery type: LiFePO4 Battery capacity: 10000 mAh Battery repleceable: no Full discharge time: ≤ 12 h Battery power: 96 Wh Solar panel voltage: 6 V Solar panel power: 35 W Battery voltage: 9.6 V Full charge time: 5-8 h
-
Krāsu atveidošanas indekss (CRI):Ra > 80
-
Kalpošanas laiks (h):30 000h
-
Ieslēgšanas/izslēgšanas cikli:20 000
-
Difuzora materiāls:PC
-
Darba temperatūras diapazons (°C):-20° +50°C
-
Aptumšojams (Dimmēšana):Yes
LED Solar Floodlight with motion sensor VIDEX VL-FSO4-205-S
Power: 16Wh
The VIDEX VL-FSO4-205-S floodlight is designed for autonomous lighting of open spaces, parks and adjacent areas. It is installed on vertical walls. It works completely autonomously and is charged by a solar panel. The rechargeable battery (built into the floodlight) is charged during the whole day from the sun, thanks to which it can work autonomously for up to 10 hours. This LED floodlight is advisable to use wherever there is no possibility of connecting to the power grid or the load on the power grid is very limited.
The main advantage of using a floodlight on a solar battery is the absence of any electricity costs, as well as:
- LEDs serve as the light source, providing high-quality, uniform and directional lighting;
- Long service life without the need for maintenance;
- The presence of a motion sensor (PIR), which is triggered at a distance of 8m and has a detection angle of 120°.
- IP65 protection, which allows the spotlight to be used in all weather conditions;
TECHNICAL SPECIFICATIONS:
- Luminous flux – 1400Lm
- Light color temperature – 5000K (daylight)
- Supports brightness adjustment (dimmer)
- Color rendering index – Ra>80
- Beam angle – 90°
- Battery type – LiFePO4, 3.2V, 5000mAh
- Battery capacity – 16Wh
- Solar panel parameters – 6V, 6W
- Control via remote control powered by CR2032 battery
- Cable length – 2m
- Lifespan – 30000 hrs
- Number of on/off cycles – 20000
- Operating time – up to 10 hrs
- Charging time – 5-8 hrs (in sunny weather)
- Number of charge-discharge cycles – 2000
- Recommended installation height – 3-4m
- Resistance to natural and mechanical influences – shock protection class IK07
- Protection class against electric shock – III
- Warranty period – 2 years.
The set with the spotlight includes: solar panel, remote control, battery for it (CR2032), mounting bolts and user manual. The weight of the entire set is 1.09kg.
The product automatically turns on at night and turns off during charging during the day. The solar panel converts sunlight into electricity and charges the spotlight battery.
Before use, make sure that the spotlight is fully charged for 8 hours in direct sunlight.
Turning the spotlight on/off
1. To activate the spotlight, press the button on its body once, and the spotlight will automatically switch to motion sensor mode. 2. To turn off the spotlight and put it into sleep mode, press and hold the same button for Z seconds.
REMOTE CONTROL:
Note: The serial number indicates the button number. For details, see the instructions.
1. Turn on (ON): Press once to turn on.
2. Maximum brightness: 100% brightness works until the battery runs out.
3. (+) button: Increase the brightness by 5%.
4. Half brightness: 50% brightness works until the battery runs out.
5. Automatic mode (AUTO): Activates the spotlight's automatic mode: the first 3 hours - 100% brightness; from the third to the sixth hour - 70% brightness; from the sixth hour and until shutdown - 30% brightness. When this mode is activated, the others, including the motion sensor, are turned off.
6. 3-hour auto-off timer (3H): The spotlight shines at 100% brightness for 3 hours, then automatically turns off.
7. 5-hour auto-off timer (5H): The spotlight shines at 100% brightness for 3 hours, from the third to the fifth hour at 70%, then automatically turns off.
8. Turn off (OFF): Press once to turn off. Double-click to enter sleep mode, in this mode the spotlight will not work.
9. (-) button: Reduce brightness by 5%.
10. (M) button: Press to activate motion sensor mode. When motion is detected in the sensor area, the light is activated at 100% for 15 seconds. In the absence of movement, the light brightness will be 10%. In the active mode, the light brightness is not adjustable. Accordingly, buttons 2, 3, 4, 9 do not work. To turn off the motion sensor mode, activate any other mode using the “AUTO”, “3H”, “5H”, “8H” buttons.
11. Wake-up (WAKE UP): After installation is complete, you need to press the “WAKE UP” button to wake up the floodlight for the first time use, after which the system can automatically charge and discharge.
12. 8-hour auto-off timer (8H): The floodlight shines at 100% brightness for 3 hours, from the third to the sixth hour - at 70%, from the sixth to the eighth hour - at 30%, and then automatically turns off.
Recommendations and precautions:
1) Sleep mode is set by default by the manufacturer to prevent accidental activation during transportation. Press the "WAKE UP" button to wake it up before use.
If the product needs to be stored for a long time, put it into sleep mode. (Double press the "OFF" key).
2) Flashing red light means charging, and a steady red light means fully charged.
3) Do not store the product with a discharged battery!
4) The LED light source is not replaceable! The battery can be replaced by the manufacturer or its service agent.
5) Used or damaged products must be disposed of in accordance with applicable regulations.
Power: 16Wh
The VIDEX VL-FSO4-205-S floodlight is designed for autonomous lighting of open spaces, parks and adjacent areas. It is installed on vertical walls. It works completely autonomously and is charged by a solar panel. The rechargeable battery (built into the floodlight) is charged during the whole day from the sun, thanks to which it can work autonomously for up to 10 hours. This LED floodlight is advisable to use wherever there is no possibility of connecting to the power grid or the load on the power grid is very limited.
The main advantage of using a floodlight on a solar battery is the absence of any electricity costs, as well as:
- LEDs serve as the light source, providing high-quality, uniform and directional lighting;
- Long service life without the need for maintenance;
- The presence of a motion sensor (PIR), which is triggered at a distance of 8m and has a detection angle of 120°.
- IP65 protection, which allows the spotlight to be used in all weather conditions;
TECHNICAL SPECIFICATIONS:
- Luminous flux – 1400Lm
- Light color temperature – 5000K (daylight)
- Supports brightness adjustment (dimmer)
- Color rendering index – Ra>80
- Beam angle – 90°
- Battery type – LiFePO4, 3.2V, 5000mAh
- Battery capacity – 16Wh
- Solar panel parameters – 6V, 6W
- Control via remote control powered by CR2032 battery
- Cable length – 2m
- Lifespan – 30000 hrs
- Number of on/off cycles – 20000
- Operating time – up to 10 hrs
- Charging time – 5-8 hrs (in sunny weather)
- Number of charge-discharge cycles – 2000
- Recommended installation height – 3-4m
- Resistance to natural and mechanical influences – shock protection class IK07
- Protection class against electric shock – III
- Warranty period – 2 years.
The set with the spotlight includes: solar panel, remote control, battery for it (CR2032), mounting bolts and user manual. The weight of the entire set is 1.09kg.
The product automatically turns on at night and turns off during charging during the day. The solar panel converts sunlight into electricity and charges the spotlight battery.
Before use, make sure that the spotlight is fully charged for 8 hours in direct sunlight.
Turning the spotlight on/off
1. To activate the spotlight, press the button on its body once, and the spotlight will automatically switch to motion sensor mode. 2. To turn off the spotlight and put it into sleep mode, press and hold the same button for Z seconds.
REMOTE CONTROL:
Note: The serial number indicates the button number. For details, see the instructions.
1. Turn on (ON): Press once to turn on.
2. Maximum brightness: 100% brightness works until the battery runs out.
3. (+) button: Increase the brightness by 5%.
4. Half brightness: 50% brightness works until the battery runs out.
5. Automatic mode (AUTO): Activates the spotlight's automatic mode: the first 3 hours - 100% brightness; from the third to the sixth hour - 70% brightness; from the sixth hour and until shutdown - 30% brightness. When this mode is activated, the others, including the motion sensor, are turned off.
6. 3-hour auto-off timer (3H): The spotlight shines at 100% brightness for 3 hours, then automatically turns off.
7. 5-hour auto-off timer (5H): The spotlight shines at 100% brightness for 3 hours, from the third to the fifth hour at 70%, then automatically turns off.
8. Turn off (OFF): Press once to turn off. Double-click to enter sleep mode, in this mode the spotlight will not work.
9. (-) button: Reduce brightness by 5%.
10. (M) button: Press to activate motion sensor mode. When motion is detected in the sensor area, the light is activated at 100% for 15 seconds. In the absence of movement, the light brightness will be 10%. In the active mode, the light brightness is not adjustable. Accordingly, buttons 2, 3, 4, 9 do not work. To turn off the motion sensor mode, activate any other mode using the “AUTO”, “3H”, “5H”, “8H” buttons.
11. Wake-up (WAKE UP): After installation is complete, you need to press the “WAKE UP” button to wake up the floodlight for the first time use, after which the system can automatically charge and discharge.
12. 8-hour auto-off timer (8H): The floodlight shines at 100% brightness for 3 hours, from the third to the sixth hour - at 70%, from the sixth to the eighth hour - at 30%, and then automatically turns off.
Recommendations and precautions:
1) Sleep mode is set by default by the manufacturer to prevent accidental activation during transportation. Press the "WAKE UP" button to wake it up before use.
If the product needs to be stored for a long time, put it into sleep mode. (Double press the "OFF" key).
2) Flashing red light means charging, and a steady red light means fully charged.
3) Do not store the product with a discharged battery!
4) The LED light source is not replaceable! The battery can be replaced by the manufacturer or its service agent.
5) Used or damaged products must be disposed of in accordance with applicable regulations.
Piegādes veicam ar Omniva, Venipak, DPD un Latvijas Pasts starpniecību.
Apmaksu, par pirkumu, var veikt tiešsaistē.
Apmaksu uz vietas var veikt ar maksājuma karti.
