LED flashlight VIDEX VLF-A376, 3600Lm 5000K is hermetic, has a rigid body and a wide light range. The user can choose not only the required operating mode, but also the light color: white or red.
Unlike other VIDEX flashlight models, this model has 2 lighting colors (white and red), a larger number of lighting modes and can be used with two types of batteries (adapter included).
The kit includes a Li-ion battery 21700 4000mAh, a belt clip, a spare cap for the tactical button, spare gaskets, an adapter for changing to an 18650 battery, and instructions for use.
Maximum brightness 3600Lm. A CREE XHP50.2 20W LED diode is used for white light and 2 x CREE XPE 3W LEDs for red light.
Flashlight Controls:
The flashlight has a simple button control system that allows you to easily switch between lighting modes and use it with one hand. It has two control buttons: the Tactical Button and the Mode Switch button.
1) The Tactical Button, located on the top of the housing, provides quick access to the flashlight. To turn the light on, press the button halfway. To turn the light off, release it. Or you can turn the light on and off by fully pressing the Tactical Button.
2) When the flashlight is on, press and hold (0.5 seconds) the switch to switch between white and red light.
3) When the white light is on, briefly press the switch to switch between its brightness modes (MOON, LOW, HIGH, TURBO, STROBE).
4) When the red light is on, briefly press the switch to switch between its brightness modes (LOW RED, HIGH RED, STROBE RED).
Flashlight operating mode:
TURBO (Turbo mode) – with the highest light brightness of 3600 Lm. Illumination distance is 300 m. Operating time is 2.5 hours. Luminous flux intensity is 21440 cd. Operating time in TURBO mode is the total tested time with overheating protection turned on.
HIGH (Maximum light power mode) – light brightness is 1100 Lm. Illumination distance is 180 m. Operating time is 3 hours. Luminous flux intensity is 7960 cd.
LOW (Minimum light power mode) – light brightness is 300 Lm. Illumination distance is 100 m. Operating time is 12 hours. Luminous flux intensity is 2560 cd.
MOON (Night mode) – the longest possible operating time in this mode is 232 hours, while generating a luminous flux of 10 lm. Illumination distance is 27 m. Luminous flux intensity 188d.
STROBE (Flashlight) – quickly emits repeated pulses of bright white light. Luminous intensity 3600 lm. Operating time 2.5 hours. Illumination distance is 300 m. Luminous flux intensity 21440 cd. Operating time in STROBE mode is the total tested time with overheating protection turned on.
HIGH RED (Maximum power red light) – luminous intensity 100 lm. Illumination distance is 30 m. Operating time 7 hours. Luminous flux intensity 260 cd.
LOW RED (Minimum power red light) – luminous intensity 10 lm. Illumination distance is 10 m. Operating time 69 hours. Luminous flux intensity 25 cd.
STROBE RED (Flashing red light) – luminous intensity 10 lm. Operating time 69 hours. Illumination distance 10 m. Luminous flux intensity 25 cd.
Discharge time tested with VIDEX battery 21700 4000 mAh. The above parameters may vary depending on the environment. The flashlight automatically remembers the selected mode.
Charging is available via USB Type-C charging cable. The flashlight charges in approximately 2.5 hours. Batteries can be used 21700 (included) or 18650 (using an adapter).
The LED indicator located on the mode switch informs about the charge level of the flashlight:
- Green glows when fully charged (100-80%).
- Green flashes when charged 79-50%.
- Red glows when charged 49-25%.
- Red flashes when charged 24-1%.
The lamp is protected and adapted for use in difficult and harsh conditions. It can withstand mechanical stress and falls from a small height. It can fall from a height of 1 m and not be damaged. The lamp has a dust and moisture protection rating of IP68.